Pyle PKBRKTL200 Instruction Manual

Pyle PKBRKTL200 Manual

Get Pyle PKBRKTL200 PDF manuals and user guides View all Pyle PKBRKTL200 manuals
Add to My Manuals
Save this manual to your list of manuals

Pyle PKBRKTL200 manual content summary:

  • Pyle PKBRKTL200 | Instruction Manual - Page 1
    Home Beer Brewing Machine with Inner Malt Pipe and Filter Screen
  • Pyle PKBRKTL200 | Instruction Manual - Page 2
    with an easy to use brew controller: Mashing - Lautering - Boling in one kettle. Can hold up to 8 Kgs of malt. SAFETY INSTRUCTIONS · Read this user manual before using the PKBRKTL200 Home Beer Brewing Machine. · Only connect to a wall outlet available for the electric load of the equipment. · The
  • Pyle PKBRKTL200 | Instruction Manual - Page 3
    THE EQUIPMENT #1: Brew kettle #2: Malt basket #3: Lifting handle (for the malt basket) #4: Filter screen in the malt basket ALL PARTS EXPLAINED: #1: Brew kettle with built in pump, riser pipe with CamLock tting, a mini ball valve, and a tap: The brew kettle is used during all phases of the brewing
  • Pyle PKBRKTL200 | Instruction Manual - Page 4
    Male and female CamLock ttings CamLock levers. CamLock ttings. CamLock closing procedure. Reverse to release. Plastic Bottom The plastic bottom are attached underneath the brew kettle, covering the electronic components and the pump. This bottom can be removed by unscrewing the screws. This will
  • Pyle PKBRKTL200 | Instruction Manual - Page 5
    ttings. If any water is found, check and tighten ttings. Check that the gaskets are properly inserted. Read instruction for pump assembly/disassembly (described later in this user manual), and check silicon hose and ttings. If there are no indications of any leakages, connect the lid hose CamLock
  • Pyle PKBRKTL200 | Instruction Manual - Page 6
    THE HOME BEER BREWING MACHINE CONTROLLER: The Home Beer Brewing Machine has an easy to use built-in controller that has been designed to support the three phases of brewing described above. Each phase is completed by basically heating up and maintaining temperatures, where each phase has a di erent
  • Pyle PKBRKTL200 | Instruction Manual - Page 7
    you to set di erent values of your choice, and according to the recipe. How to change the parameters is described later in this user manual. If you want a protein rest at around 45°C/113°F, it is possible for you to set. Starch conversion in the mash occurs between 55°C/131
  • Pyle PKBRKTL200 | Instruction Manual - Page 8
    7. Program selector: Select the program I, II and III when the equipment is paused. Keeping press this key for 5 seconds, the program set and run will be recovered to default value. PROG I include the rst three phase: HEAT, MASH and LAUTER. PROG II include the last phase: BOIL. PROG III include all
  • Pyle PKBRKTL200 | Instruction Manual - Page 9
    OPERATION GUIDE 1. Power ON After the machine is plugged in, the display screen and the blue backlight will be ON for 2 seconds, and the machine will be
  • Pyle PKBRKTL200 | Instruction Manual - Page 10
    When you select program I, the machine will run all steps as the order of S - L, also can choose any step from S - L by press STEP key then the machine will start to run from this step. 1. Operation S step: The PHASE on the display screen displays "HEAT", the default power is 100%, the temperature
  • Pyle PKBRKTL200 | Instruction Manual - Page 11
    C. The operation of the selection program III (PROG display III only) When you select program I, the machine will run all steps as the order of S - B3, also can choose any step from S - L by pressing STEP key then the machine will start to run from this step. 1. Operation S step: the PHASE on the
  • Pyle PKBRKTL200 | Instruction Manual - Page 12
    5. Step Selection When the machine in standby or pause state, every time when pressing "STEP" button, the selected STEP symbol will be blink in order on the screen, thus the power (wattage), temperature and timing corresponding to the selected STEP can be set. You can also press the "RUN/PAUSE" key
  • Pyle PKBRKTL200 | Instruction Manual - Page 13
    the pump, preventing the impeller inside the pump front casing from running. In case of clogging you may need to take the pump out for manual cleaning. Ensure that the Home Beer Brewing Machine is empty and cooled down to approximately room temperature. Disconnect the power cord from the wall outlet
  • Pyle PKBRKTL200 | Instruction Manual - Page 14
    Remove the screws holding the bottom cover plate, using a Phillips screwdriver. Disconnect the power cord quick connector (#1). Loosen the two hose clamps (#2 and #3) and remove the hoses from the pump. Unscrew the screw attaching the 2 ground cables (#4), and nally, loosen the screw attaching the
  • Pyle PKBRKTL200 | Instruction Manual - Page 15
    FEATURES: • Circulation System with Inner Pump • Mashup to 17lbs. of Malt • 9 Gallons Maximum Capacity • Heavy Duty Single Wall, Stainless Steel Construction • Adjustable Program Controller (Switchable from Fahrenheit to Centigrade) • Programmable Brew Recipe - Automatic Multi-Step Time and
  • Pyle PKBRKTL200 | Instruction Manual - Page 16
    Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: [email protected]
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
with Inner Malt Pipe and Filter Screen
Home Beer Brewing Machine