Pyle PLE430PX PLE430PX Manual 1
Pyle PLE430PX Manual
 |
View all Pyle PLE430PX manuals
Add to My Manuals
Save this manual to your list of manuals |
Pyle PLE430PX manual content summary:
- Pyle PLE430PX | PLE430PX Manual 1 - Page 1
raised so high, ple430px you cannot hear what is occurring in traffic around you. Be aware that repeated exposure to excessive volume levels can permanently damage your hearing! Keep all electronics away from moisture, dust, extreme heat or extreme vibrations. Pyle Audio products are capable of - Pyle PLE430PX | PLE430PX Manual 1 - Page 2
Pyle Audio, and congratulations on joining a select group of dedicated enthusiasts committed to the very best in mobile sound performance and dependability. You are now the proud owner of one of the world's most sophisticated electronics components. This Pyle , owner s manual CD 6 3 12 7 45 8 9 - Pyle PLE430PX | PLE430PX Manual 1 - Page 3
by 18dB. (8) Subwoofer Channel Outputs - RCA cables are used to connect the subwoofer channel amplifier inputs. (9) CD subwoofer output and the front/rear output signals. electrical connection , owner s manual System wiring basic system application using front, rear, and subwoofer amps ple430px - Pyle PLE430PX | PLE430PX Manual 1 - Page 4
, owner s manual Please take the time to install your New Pyle Signal Processor Securely, according to this (A relay should be used if turning on more than one component, such as Eqs, Crossover or amplifier.) Connect stereo RCA cables from the head's left and right from outputs to the left and right
-
1 -
2 -
3 -
4
 |
 |
ple430px
Never drive with the volume raised so high,
you cannot hear what is occurring in traffic
around you.
Be aware that repeated exposure
to excessive volume levels can
permanently damage your hearing!
Keep all electronics away from moisture, dust,
extreme heat or extreme vibrations.
Pyle Audio products are capable of sound
pressure levels in excess of 150dB. Continuous
exposure to sound pressure levels over 100dB
may cause permanent loss of hearing. Use
common sense and PRACTICE SAFE SOUND.
If you experience
.....
Signal Processor does not turn on. Check that:
Remote Turn-On Wire has 12V
12V wire has 12V.
Ground wire is properly connected.
Level of sound is low. Check that:
Wiring is not loose or cables misconnected/disconnected.
RCA cables are not faulty
Background noise is too high. Check that:
Wiring is not loose or cables misconnected/disconnected.
RCA cables are not faulty
7
precautions
troubleshooting
ple430px