Pyle PLMCWD75 Instruction Manual
Pyle PLMCWD75 Manual
 |
View all Pyle PLMCWD75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Pyle PLMCWD75 manual content summary:
- Pyle PLMCWD75 | Instruction Manual - Page 1
2-WAY Motorcycle alarm system All rights reserved The trademark, patent and copyright are owned by Steelmate Co., Ltd. The right to change the design and specifications reserved Manual - Pyle PLMCWD75 | Instruction Manual - Page 2
01 Technical parameter 02 Brief look at each device 02 Transmitter charging 02 Low battery warning 02 Functions 03 Installation Manual 886 series installation guide 06 986 series installation guide 08 ECU installation 10 ECU light installation 10 Siren installation 10 Troubleshooting 11 - Pyle PLMCWD75 | Instruction Manual - Page 3
Please install the system by an authorized engineer Keep the product and the transmitters from water. It is highly recommended you read this manual carefully before the installation and operation of this unit. When the transmitter operating distance is shorter or its indicator light turns dark - Pyle PLMCWD75 | Instruction Manual - Page 4
Functions 1. Arming When ignition is turned to off, press button to arm the system. 2. Mute arming Press button twice (or muet arming mode. button once) to enter 3. Shock impact alarm In arming mode, the first shock impact will trigger the system warning, the siren will chirp with turn signals - Pyle PLMCWD75 | Instruction Manual - Page 5
Installation Manual 05 886 series installation guide AC ignition installation diagram Flameout wire 06 - Pyle PLMCWD75 | Instruction Manual - Page 6
DC ignition installation diagram Flameout wire 07 Fuse 986 series installation guide AC ignition installation diagram Flameout wire 08 - Pyle PLMCWD75 | Instruction Manual - Page 7
Fuse DC ignition installation diagram Flameout wire 09 ECU installation Please mount the ECU downside as shown in the figure. ECU light installation Siren installation Please mount the siren downwards as shown in the figures 1 or 2 below 1 2 3 1. Drill a hole ( 8) around the block where it can - Pyle PLMCWD75 | Instruction Manual - Page 8
Troubleshooting 1). Transmitter is ineffective or the control distance decreased improperly connected. l The siren is damaged. 5) If the problem persists, please follow these steps l For consumer contact your dealer or nearby service centre. l For installer or dealer email your question to us
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
2-WAY
Motorcycle alarm system
All rights reserved
The trademark, patent and copyright are owned by Steelmate Co., Ltd.
The right to change the design and specifications reserved
Manual