Pyle PRJ3D99TU PRJ3D99TU Manual 1 - Page 26
● If the selected video image is not displayed after the projector is - amplifiers
View all Pyle PRJ3D99TU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
1.Take an HDMI cable and connect one end to the HDMI output socket of the Video source device. 2.Connect the other end of the HDMI cable to the HDMI input socket on the projector. 3.Connect one end of separate audio cable to the projector, and the other end to a suitable audio amplifier. Note: You can also connect the separate audio cable to a suitable audio amplifier. But the quality of the audio from HDMI is better. The final connection path should be like that shown in the following diagram: Note: ● It is not recommended to establish the connection via a DVI to HDMI cable. The weight of the DVI to HDMI adapter may be pulling down on the HDMI port, causing it to become loose over time. ● If the selected video image is not displayed after the projector is 26