Pyle PRJ3D99TU PRJ3D99TU Manual 1 - Page 29
Composite Video
View all Pyle PRJ3D99TU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
device again using an S-video or Composite Video connection as this makes an unnecessary second connection of poorer picture quality. You need only connect using a composite Video connection if neither Component Video nor S-video is supplied on the video source device (for example, with some analog video cameras). If S-video connectivity is available, you should use it in preference to composite Video. See "Connecting Video source devices" on Page 22 for details. To connect the projector to an S-video or a Composite Video source device: With an S-video cable: With a Video cable: 1.Take an S-Video cable and 1.Take a Video cable and connect one end to the connect one end to the Video S-Video output socket of the output socket of the Video Video source device. source device. 2.Connect the other end of the 2.Connect the other end of the S-Video cable to the S-VIDEO Video cable to the VIDEO socket on the projector. socket on the projector. 3.You should also connect the separate audio cable to a suitable audio amplifier. The final connection path should be like that shown in the following diagram: 29