Pyle PSS4 Owners Manual
Pyle PSS4 Manual
 |
View all Pyle PSS4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Pyle PSS4 manual content summary:
- Pyle PSS4 | Owners Manual - Page 1
HIGHPOWERSTEREOSPEAKERSELECTOR MODEL:PSS4/PSS6 - Pyle PSS4 | Owners Manual - Page 2
Thank you for purchasing PYLE PRO Multi-Speaker Selectors. It lets you connect up to four (PSS4) or six (PSS6) separate pairs of speakers to your stereo receiver/amplifier. The control center is especially convenient if you have speaker sets in different rooms and want to turn them on and off - Pyle PSS4 | Owners Manual - Page 3
with amplifiers rated at 100 watts per channel or less. • Your PYLE PRO Speaker Selector is designed to accept any size cable up to 14 gauge non-terminated speaker wire. If you're using non-terminated speaker wire, do not use any speaker wire that is larger than 14 gauge. The lower the gauge number - Pyle PSS4 | Owners Manual - Page 4
Press open the desired SPK terminals on the control center. Insert the speakers' positive (+) wires in the positive (red) terminals, and negative (-) wires into the nagative (black) terminals, according to the respective L (left) and R (right) terminals. Then press - Pyle PSS4 | Owners Manual - Page 5
connected to the control center, simply press in the desired button. For example, to turn on the set of speakers connected to SPK A, press A. To turn off a pair of speakers, press the button again so it is in the "out" position. Note:if no speakers are connected to a set of terminals, do not press - Pyle PSS4 | Owners Manual - Page 6
will vary depending on how many pairs of speakers you turn on at one time, and on which speakers you turn on. The chart below shows the impedance for all possible combinations of 8-ohm speakers. PSS4 Speaker Sets On Impedance (Ω) A, B, C or D 8 PSS6 Speaker Sets On A, B, C, D, E or F Impedance - Pyle PSS4 | Owners Manual - Page 7
Separation Crosstalk between channels Speaker terminal wire size requirements Dimensions (WxHxD) Weight 50W (R.M.S.)/ch, 100W (Max)/ch 20 Hz to 20KHz 80 dB 50 dB 14-22 awg 190x50x120 mm (PSS4) 250x50x150 mm (PSS6) 0.81kgs (1.79lbs) (PSS4) 1.15kgs (2.54lbs) (PSS6) PYLE AMPLIFIERS CAR AMPLIFIERS
-
1 -
2 -
3 -
4 -
5 -
6 -
7
 |
 |
HIGH POWER STEREO SPEAKER SELECTOR
MODEL
:
PSS4 / PSS6