RCA ANT800R Owner/User Manual: ANT800
RCA ANT800R Manual
 |
UPC - 044476064531
View all RCA ANT800R manuals
Add to My Manuals
Save this manual to your list of manuals |
RCA ANT800R manual content summary:
- RCA ANT800R | Owner/User Manual: ANT800 - Page 1
ENGLISH ANT800 Outdoor Antenna User's Guide BEFORE YOU START!!! Please read the IMPORTANT SAFETY INFORMATION sheet included in this package. Getting Started Remove the antenna and the hardware bag from package. Make sure the following parts are in the package: • Antenna • Amplifier Insert • - RCA ANT800R | Owner/User Manual: ANT800 - Page 2
in mounting the antenna. The ANT800 can be mounted: • To a surface, such as a rooftop, eaves, siding, or rafters in an attic - OR - • To a standard mast (not included) WARNING: Never hang anything from the ANT800; never attach foreign objects to the ANT800. NOTES: Do not install the ANT800 on any - RCA ANT800R | Owner/User Manual: ANT800 - Page 3
base. Make sure the base is oriented correctly for the direction you want to point the antenna. Use the illustration on the left as a guide. Mounting base 2. Mount the base to the surface. Find the four wood screws included in this Wood screw package. Using these screws, attach the base - RCA ANT800R | Owner/User Manual: ANT800 - Page 4
next to the arm, there are two screws. Loosen these just enough so that you can rotate the antenna on the arm. Once you've found the orientation you want, tighten these screws. 6. Tighten all screws. Attach the screw covers. 7. Skip to the "Connecting to Your TV" section to complete installation. 4 - RCA ANT800R | Owner/User Manual: ANT800 - Page 5
for the direction you want to point the antenna. Use the illustration on the left as a guide. U-Bolt Wing Nut 2. Attach the clamp included). Slide the antenna clamp assembly over the mast as shown here, positioning the mast between the clamp and the antenna. Position the ANT800 antenna as high as - RCA ANT800R | Owner/User Manual: ANT800 - Page 6
next to the arm, there are two screws. Loosen these just enough so that you can rotate the antenna on the arm. Once you've found the orientation you want, tighten these screws. 7. Tighten all screws. Attach the screw covers. 8. Skip to the "Connecting to Your TV" section to complete installation. 6 - RCA ANT800R | Owner/User Manual: ANT800 - Page 7
Connecting to Your TV ANT800 Coaxial Cable Amplifier Insert ANTENNA TV/STB TV 1. Run an RG6 coaxial cable from the antenna towards your television set. Connect the RG6 coaxial cable to the ANT jack on the supplied amplifier insert. 2. Connect built-in coaxial cable on the amplifier insert to - RCA ANT800R | Owner/User Manual: ANT800 - Page 8
serviced or used outside the United States or Canada improper installation, mishandling PRICE specific legal rights and you may also have other rights which vary from state/ province to state/province. U.S.A.: Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge, NY 11788 CANADA: Audiovox - RCA ANT800R | Owner/User Manual: ANT800 - Page 9
tome en cuenta estos factores que afectan la calidad de la recepción: • Generalmente, el desempeño es mejor cuando se monta la antena ANT800 en posición horizontal. • La antena ANT800 debe montarse en el costado de la vivienda que mire hacia la mayoría de las torres de radiodifusión de la localidad - RCA ANT800R | Owner/User Manual: ANT800 - Page 10
- • En un mástil estándar (no se incluye) ADVERTENCIA: Nunca cuelgue nada ni monte objetos extraños en la antena ANT800. NOTAS: No instale la ANT800 en superficies metálicas, ni siquiera en el revestimiento de aluminio de paredes exteriores. Montarla en superficies metálicas empobrece gravemente la - RCA ANT800R | Owner/User Manual: ANT800 - Page 11
Montaje en superficies Ldairaenctceinóan.a..punta en esta ..d.oireencceióstna. Receptáculo de montaje 1. Oriente la base de la antena. Es fundamental orientar la base en la misma dirección en que debe apuntar la antena. Guíese por la ilustración de la izquierda. Base de montaje Tornillo para - RCA ANT800R | Owner/User Manual: ANT800 - Page 12
5. Coloque y oriente la antena. Afloje los tornillos que fijan el brazo a la base o a la antena, apenas lo necesario para colocar la antena y orientarla en la dirección que interese. También puede ajustar la orientación sobre la misma antena. En la cara inferior de la antena, junto al brazo, hay dos - RCA ANT800R | Owner/User Manual: ANT800 - Page 13
conjunto de abrazadera de la antena sobre el mástil como se indica, de manera que éste quede entre la abrazadera y la antena. Suba la antena ANT800 sobre el mástil tan alto como sea posible. Oriente la base en la dirección que interese. Luego, apriete las abrazaderas y las tuercas de mariposa en - RCA ANT800R | Owner/User Manual: ANT800 - Page 14
5. Fije la antena en el brazo. Busque el otro juego de tornillo, arandela y tuerca. Primero, ponga la arandela y la tuerca en el receptáculo de montaje de la antena. Luego, coloque el brazo al otro costado del receptáculo. Fije el brazo en la antena como se indica. 6. Coloque y oriente la antena. - RCA ANT800R | Owner/User Manual: ANT800 - Page 15
ESPAÑOL Cómo conectar a su televisor ANT800 Cable coaxial Amplificador accesorio ANTENNA TV/STB Televisor 1. Tienda un cable coaxial RG6 desde la antena hasta el televisor. Acople el cable coaxial RG6 en el conector ANT del amplificador accesorio - RCA ANT800R | Owner/User Manual: ANT800 - Page 16
Garantía Limitada de 12 Meses Audiovox Electronics Corporation (la "Compañia") le garantiza a usted, el , puede disfrutar además de otros derechos. U.S.A.: Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge, NY 11788 CANADÁ: Audiovox Return Center, c/o Genco, 6685 Kennedy Road,
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
 |
 |
ANT800
Outdoor Antenna
User’s Guide
Getting Started
Remove the antenna and the hardware bag from package. Make sure the
following parts are in the package:
•
Antenna
•
Amplifier Insert
•
Power Adapter
•
Mounting Base
•
Mounting Arm
•
Hardware bag:
(2) Screws
(4) Screw Covers
(2) U-Bolts
(2) Clamps
(4) Wing Nuts
(4) Wood Screws
(1) Rubber Boot for Antenna Connector/Coaxial Cable
Finding the Right Location
Before you mount the ANT800, consider the following factors in reception
performance:
•
The ANT800 usually performs best when mounted horizontally
•
The ANT800 should be mounted on the side of your house that faces
most of your local broadcast towers (See illustration below) Visit
www.antennaweb.org to see the locations of your local broadcast
towers.
•
The higher the elevation of the antenna, the better the reception
performance will be.
BEFORE YOU START!!!
Please read the IMPORTANT SAFETY INFORMATION sheet included in
this package.
ENGLISH