RCA CC6151 User Guide - Page 15
Use the Battery, to Power, Your Camcorder - camcorder battery
UPC - 034909720455
View all RCA CC6151 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Use the Battery to Power Your Camcorder The battery must be charged as described on the next page before it can be used the first time. Initial charging takes approximately 70 minutes for the FB 1260 (100 minutes for the BB700). When fully charged, the FB 1260 supplies approximately 50-55 minutes (BB700 approximately 75-85 minutes) of operating time - depending on how much you use the light, zoom, and pause. Conserve battery power by turning the camcorder off during recording breaks. Note: Use the small marker switch on the top of the battery to help remind yourself to charge the battery. It has no other purpose. Marker Switch BATT. RELEASE Button Attach the Charged Battery If the DC cable is attached to the camcorder, remove it before attaching the battery. Also, install the lithium clock cell before attaching the battery. Details are on page 17. 1. Hook the top end of the battery to the back of the camcorder as shown above. 2. Press the battery down until it locks into place. 3. Set the POWER switch to CAMERA. The power indicator lights. Remove the Battery Slide and hold the BATT. RELEASE button to the right while removing the battery. ATTENTION: The RBRC seal on the battery used in your Thomson Consumer Electronics product indicates that we are participating in a program to collect and recycle Nickel Cadmium batteries throughout the, United States. Please call 1-800-8-BATI'ERY for information or _ontact your local recycling center. 13