RCA CC6151 User Guide - Page 16
Battery, to Power, Camcorder, continued, Charge, the Battery, Use the, Button - battery charger
UPC - 034909720455
View all RCA CC6151 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Use the Battery to Power Your Camcorder Hold Battery Flush and Slide (continued) Marks I CHG (Charge) Im REFRESH • Indicator Adapter/Charger To AC Wall Outlet 100- 240 Volts, 50/60 Hz. Button Charge the Battery If the DC cable is attached to the DC OUT jack on the adapter/charger, remove it. 1. Align reference mark on battery with mark on adapter/charger. 2. Hold the battery flush against the adapter/charger and slide it in the direction of the arrow. 3. Plug adapter/charger into nearest AC outlet (100-240V, 50/60Hz). 4. If the battery is properiy connected, the CHG indicator flashes. Note: If you try to charge a battery that has not been charged for a long period of time, it may take a few minutes for the CHG indicator to flash. 5. After the battery is charged, the CHG indicator stops flashing and lights. 6. Remove the charged battery by sliding it off the adapter/charger. 7_ Attach the charged battery to the oamcorder. 14 Use the REFRESH Button The battery provides increased operation time if you "refresh" it after five chargings. The refresh feature "refreshes" the battery by completely discharging it. 1. Attach battery to adapter/charger. 2. Press REFRESH. The REFRESH indicator lights and the battery begins discharging. 3. When discharging is completed, the REFRESH indicator turns off, and the CHG indicator flashes. The battery now charges. 4. After the battery is charged, the CHG (charge) indicator stops flashing and lights. 5. Remove the battery from the adapter/charger.