RCA CC6151 User Guide - Page 70
Playback, on a TV, Audio/Video, Inputs
UPC - 034909720455
View all RCA CC6151 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Playback on a TV Without Audio/Video Inputs To connect your camcorder to a TV without audio/video inputs, you need an optional 1CVA 147C RF output adapter and an optional coaxial RF cable, such as VH82 or VH90 shown on page 72. If your TV has audio and video inputs (or is connected to a VCR), refer to pages 66-67. VHF Antenna OR /N Optional Coaxial RF Cable (such as VH82 or VH90) Back of TV ,€_:l--- t _ I\ nI Optional 300-75 Ohm \ Transformer N OUT TO TV Connector VCRITV Switch AUDIO, RF DC OUT, VIDEO Jacks RF Output Adapter's Plug IN FROM ANT Connector CH3/CH4 Switch t Optional RF Output Adapter (1CVAI47C) Installation l. Disconnect the VHF antenna from your TV. Connect the antenna to the IN FROM ANT connector on the RF output adapter if you are going to leave the adapter connected to the TV. Note: If your VHF antenna is the flat twin-lead type attached by two screws, you need an optional 300/75 ohm transformer. . Attach one end of the optional coaxial RF cable to the OUT TO TV connector on the adapter, and attach the other end to the VHF input on ,your TV as shown. 68 Note: If your TV has 300 ohm screw terminals, you need a 75/300 ohm transformer, such as VH54, shown on page 72. . Attach the RF output adapter's plug to the AUDIO, RF DC OUT, and VIDEO jacks located under the small cover on the back of the camcorder.