RCA HD50LPW165 User Guide & Warranty - Page 63
Channel Search, Software Upgrade, Signal Source, Video Input Setup
View all RCA HD50LPW165 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Using the TV's Menu System 0 Go Back 1 Signal Search 2 Channel Search 3 Software Upgrade 4 Signal Source 5 Video Input Setup 6 Auto Tuning 7 DTVLink Setup 8 Special Features 9 Ethernet Setup Main Menu Connections Input to search: Cable Input Antenna Input Channel Search finds channels for you. Check fewer boxes to make the search faster (but less complete) and vice versa. Channels to search: Digital channels Analog channels The first time that you do a Channel Search, put a check in all the boxes to do a thorough search for channels. Other search options: Detect antenna or cable setting Include previously found channels in search Start Press OK to start a Full Channel Search of both tuners including automatic detection of Cable or Air antenna. Tip You can still add a channel that was not found by Channel Search. Clear any on-screen menus, and tune to it by using the number buttons on the remote. If the channel can be tuned, it will be added to the channel list for that tuner. Channel Search Engaging in a channel search tells the TV to search for all the terrestrial TV channels available through the Antenna and Cable Inputs. When the TV finds an active channel, it places it in the channel list. Inactive channels (weak stations or channels with no signal at all) aren't placed in the channel list. To do a complete channel search, check each box that pertains to your TV. For example, if you're only receiving cable from the CABLE INPUT, highlight Cable Input and press OK to place a checkmark in the box. Select Start to begin the search. Notes: Channel Search with all options selected takes a long time to complete because all possible analog and digital channels are being searched. If a cable box is connected to your TV's CABLE INPUT or a CableCARD is in use, Channel Search won't work for Cable Input. 0 Go Back 1 Signal Strength 2 Channel Search 3 Software Upgrade 4 Signal Source 5 Video Input Setup 6 Auto Tuning 7 DTVLink Setup 8 Special Features 9 Ethernet Setup Main Menu Connections Current TV Software Version and Date: A2.0B/B2.0A If you have a connection to the TV's Ethernet jack, your TV may periodically alert you to the availability of a free TV-software upgrade which can be downloaded through the Ethernet jack. From time to time, your cable company may use the Cable Input to automatically upgrade the digital-cable software in the TV. If the TV is on, you'll be notified when it occurs. Status: A new TV-software upgrade is not available at this time. If one were available, you would be able to select a button on this screen to acquire it. You can view your current TV-software version and check if a new software version is available. Press4to continue. 0 Go Back 1 Signal Strength 2 Channel Search 3 Software Upgrade 4 Signal Source 5 Video Input Setup 6 Auto Tuning 7 DTVLink Setup 8 Special Features 9 Ethernet Setup Main Menu Connections Front Input Use this screen if you have misplaced your remote control and need a way to tune to a different antenna or to go to the video inputs. Use the arrows to highlight the rectangle then press OK or MENU-OK to scroll to the input you want. You can select a source from the available signal sources. Press OK to continue. 0 Go Back 1 Signal Strength 2 Channel Search 3 Software Upgrade 4 Signal Source 5 SVigdneaol ITnyppuet Setup 6 Auto Tuning 7 DTVLink Setup 8 Special Features 9 Ethernet Setup Main Menu Connections Select the Input 2 video source: Component Video (Y PB PR) Composite Video Select the Input 4 video source: Component Video (Y PB PR) Composite Video The component video (Y PB PR) connectors on the TV can be changed to accept composite video instead. When using composite video, connect the yellow RCA cable to the Y/VIDEO connector on the TV. You can select the Air/Cable setting for Antenna A and Antenna B. Press OK to continue. Software Upgrade The Software Upgrade screen contains current software information and indicates if a new upgrade is available. The software information and upgrades can be accomplished only if you have the TV connected via the Ethernet cable to the Internet with ISP subscription. Select the Upgrade Now button, if available, to upgrade your software. Note: If using a dial-up service via a router connected at a dial-up speed of 56K, the Software Upgrade could take several hours or more. If the TV is unplugged during a Software Upgrade, it could cause the TV to not operate properly. Signal Source The Signal Source menu allows you to choose the source from which you would like the signal to come: Cable Input, Antenna Input, or Video Inputs. The same can be accomplished using the component buttons if you've set up Auto Tuning on the remote or by pressing the ANT•CAB or INPUT button. But, if you misplace the remote, this feature gives you another way to tune to a signal source. Video Input Setup The Video Input Setup screen lets you choose which type of connection you're using for the Input 2 and/or Input 4 jack on the back of the TV. If you decide to change the connection, you need to go back into the Video Input Setup screen. Chapter 4 61