RCA HD56W66 User Manual - Page 33

Using the TV's Features Tip: Look at the channel number to determine whether you're on the digital or analog tuner. A 'D' appears next to channel numbers on the digital tuner, while an 'A' appears next to channel numbers on the analog tuner. Digital and Analog Tuners Your TV has two tuners: one for regular, analog TV channels and one for digital channels. You can switch between the two by pressing the ANT•CAB button on your remote control when the remote is in TV mode. 4/3 format Mono English cc 03:45 pm Program title Program description... 15-1 NBC-HD Commercial skip 0:30 15-1 NBC-HD Digital Tuner Primary Channel Subchannel (if necessary) Digital Channels Digital channels can be made up of primary channels and subchannels. Subchannels (sometimes called minor channels) are channels associated with the Primary channel (sometimes called the major channel). A primary channel may have just one subchannel or multiple subchannels. Direct Tuning to a Channel on the Digital Tuner 1. Make sure the remote is in TV mode by pressing TV on the remote control. 2. Press ANT•CAB until a "D" icon appears next to the channel number. 3. Enter the primary channel number. This number appears first. Press OK or wait a few seconds. If you don't enter a subchannel, the TV tunes to the lowest digital subchannel. 3. If the primary channel number has fewer than two digits, and you want to enter subchannel numbers, press the right arrow button to enter the subchannel. 4. Enter the number of the subchannel. This number appears to the right of the primary channel number. 5. Press OK to tune to the channel or wait a few seconds and the TV tunes to the channel. Note: Once you've run the auto channel search on a tuner, you can just use the channel up and down buttons on the remote control to change channels when the remote's in TV mode. Chapter 3 31