RCA L32HD32D User Guide & Warranty - Page 16

NOTE: • Memorizing channels is best accomplished during evening "PRIMETIME" hours, as more stations are broadcasting digital signals. Memorizing channels can only be accomplished while a station is broadcasting a digital signal to set that channel into memory. • If you are unsure of the digital channels available in your area, you may visit www.antennaweb.org to receive a list based on your address or zip code. • New digital channels may be added to your area periodically, it is recommended to perform the "Automatic Search" procedure regularly. Adding Channel If you find a new channel unregistered, you can add the new channel into the channel memory. 1 Tune in the new channel. 2 Press SETUP/TV MENU in the TV mode. The TV menu screen will appear. 3 Press ▲ or ▼ to select "Channel", then press ▶ or ENTER. 4 Press ▲ or ▼ to select "Add/Delete", then press ▶ or ENTER. Add/Delete Adding Channel >> Add/Delete >> Clear All >> : Select ENTER:Set 5 Press ▲ or ▼ to select "Adding Channel", then press ▶ or ENTER. The new channel will be added into the channel memory. 6 Press EXIT/CANCEL to return to the normal screen. Add/Delete channel You can select the channel that you want to skip. 1 Press SETUP/TV MENU in the TV mode. The TV menu screen will appear. 2 Press ▲ or ▼ to select "Channel", then press ▶ or ENTER. 3 Press ▲ or ▼ to select "Add/Delete", then press ▶ or ENTER. 4 Press ▲ or ▼ to select "Add/Delete", then press ▶ or ENTER. 5 Press ▲ or ▼ to select the channel that you want to skip. Add/Delete CH 2 3 3-001 3-002 4 Signal Analog Analog Digital Digital Analog Add Add Delete Add Delete : Select : Adjust 6 Press ◀ or ▶ to select "Add" or "Delete", whichever function you want to perform. 7 Repeat steps 5 - 6 for other channels you want to add or delete. 16 8 Press EXIT/CANCEL to return to the normal screen. Clear All All channels are deleted from the channel memory. 1 Press SETUP/TV MENU in the TV mode. The TV menu screen will appear. 2 Press ▲ or ▼ to select "Channel", then press ▶ or ENTER. 3 Press ▲ or ▼ to select "Add/Delete", then press ▶ or ENTER. 4 Press ▲ or ▼ to select "Clear All", then press ▶ or ENTER. Add/Delete Adding Channel >> Add/Delete >> Clear All >> : Select ENTER:Set 5 Press EXIT/CANCEL to return to the normal screen. TV operation 1 To turn on the TV, press POWER. (POWER indicator on the front of the unit changes green. It may take approx. 10 seconds for a picture to appear on screen.) 2 Adjust the volume level by pressing VOL + or - . The volume level will be indicated on the screen by blue bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of blue bars also decreases. 3 Set the Signal Type option to the appropriate position (see "Air/Cable selection" on page 15). 4 Press the Direct Channel Selection (0-9, -) buttons to select the channel. (If you press only channel number, channel selection will be delayed for a few seconds.) TO SELECT ANALOG CHANNELS 1-9: Press 1-9 as needed. Example, to select channel 2, press 2. 10-99: Press the 2 digits in order. Example, to select channel 12, press 1, 2. 100-125: Press the 3 digits in order. Example, to select channel 120, press 1, 2, 0. TO SELECT DIGITAL CHANNELS Press the first 3 digits, then press the - button, followed by the remaining number. Example, to select channel 015-001, press 0, 1, 5, -, 0, 0, 1. • If a channel is selected with only audio content, "Audio only" will be displayed on the screen. • If a channel is selected with a weak digital signal, "Digital channel signal strength is low" will be displayed on the screen. The same program may be available on either an analog channel or a digital channel. You may choose to watch either format. • If a channel is selected to which you have not subscribed, "Digital channel is encrypted" will be displayed on the screen. 51H0101A_eng.indd 16 2/26/08 9:47:38 AM