RCA MAF75BKR Installation Manual
RCA MAF75BKR Manual
 |
View all RCA MAF75BKR manuals
Add to My Manuals
Save this manual to your list of manuals |
RCA MAF75BKR manual content summary:
- RCA MAF75BKR | Installation Manual - Page 1
Manual MAF75BKR Fits TVs 26"- 40" Maximum Load Capacity - 100 lb (45 kg) Thank you for choosing the RCA MAF75BKR package and read the installation instructions carefully. WARNING: Use of this be capable of supporting the combined weight service and for proof of purchase. Attach it here and record - RCA MAF75BKR | Installation Manual - Page 2
! For safety reasons, this mount must be secured to at least two wood studs no less than 16" apart. The studs must be capable of supporting the combined weight of the mount and display. 1. Use a high quality stud finder to locate two adjacent studs where you wish to install your mount - RCA MAF75BKR | Installation Manual - Page 3
English Concrete/Brick Installation IMPORTANT! For safety reasons, the concrete wall must be capable of supporting the combined weight of the mount and the display. The manufacturer takes no responsibility for failure caused by walls of insufficient strength. 1. Place the - RCA MAF75BKR | Installation Manual - Page 4
Fig.7 5. Remove the clips located towards the top of each arm and take out the pins (see Fig.8). Then push down and hold both tilt adjustment rod knobs simultaneously. Lift both sides of the rod together and open both arms completely as shown in Fig.9. 1 2 3 7. Attach the mount arms to the back of - RCA MAF75BKR | Installation Manual - Page 5
English Final Installation 1. With the help of another person, carefully lift your display and place it on the wall plate. Do not release the display until the mount arms have securely hooked onto the wall plate. 2. Insert the safety bar at the bottom of the mount to prevent the display from - RCA MAF75BKR | Installation Manual - Page 6
prepaid, to the Company at the address shown below. Do not return this product to the Retailer. This Warranty does not cover product purchased, serviced or used outside the United States or Canada. This Warranty is not transferable and does not extend to costs incurred for installation, removal or
-
1 -
2 -
3 -
4 -
5 -
6
 |
 |
flat panel
solutions
Wall Mount for LCD, Plasma, and
LED Displays
Installation Manual
MAF75BKR
Fits TVs 26”- 40”
Maximum Load
Capacity – 100 lb (45 kg)
Thank you for choosing the RCA MAF75BKR Universal Flat Panel
TV Wall Mount. This mount can be used for all major brands of
26" - 40" flat panel TVs, 100 lbs (45 kg) or under. This wall mount
features a 0-15-degree tilt for easy viewing. Before attempting
to mount your television set, please remove all parts from this
package and read the installation instructions carefully.
WARNING: Use of this mount with a TV weighing over 100
lbs. or with a screen larger than 40" could cause the mount
to fail causing property damage and/or personal injury.
1.
Read these instructions carefully before you begin.
If you are unsure of any part of the process, contact
a professional contractor or installer for assistance.
Improper installation can result in injury or damage.
2.
The wall or mounting surface must be capable of
supporting the combined weight of the mount and
the display; if not, the structure must be reinforced.
3.
Safety gear and proper tools must be used. Failure
to do so can result in injury and/or damage. A
minimum of two people are required for installation.
Do not attempt to install this mount alone under any
circumstances.
4.
Follow all instructions and recommendations
regarding adequate ventilation and suitable
locations for mounting your display. Consult the
owner‘s manual for your particular display for more
information.
5.
For drywall installation, it is essential for the
wall mount plate to be attached to wall studs.
(Use a stud finder.)
6.
Use the included hardware for mounting purposes.
This hardware has been provided to ensure a safe
and secure mount.
7.
Hire a licensed electrician to relocate an electrical
outlet, if needed.
8.
Be sure to purchase wires long enough to connect
the TV to the audio and video components in your
installation.
Keep your sales receipt to obtain warranty parts and
service and for proof of purchase. Attach it here and
record the model number. This number is located on
the product.
Model No. ____________________________________
Purchase Date_________________________________
Dealer/Address/Phone _________________________
Safety precautions
Follow these precautions to ensure safe installation and mounting of your flat panel TV.
Tools
Phillips Head Screwdriver
Ratchet or Driver with 13 mm (1/2”) Socket
Electric or Portable Drill
3/16” (4.8 mm) Drill Bit and Stud Finder for Drywall
Installation
3/8” (10 mm) Masonry Bit for Concrete Installation
Package Contents
Wall Plate (x1)
Mount Arm (x2)
Tilt Adjustment Rod (x1)
Safety Bar (x1)
Instruction Manual (x1)
Hardware Kit (x1)
Preparing to install
Before beginning the installation process, verify that you have all the necessary tools on hand. The following
tools are required for proper installation:
Continues on next page...
Pour des instructions
en français, se
reporter à la page 6.
Para obtener
instrucciones en
español, consulte la
página 11.
CAUTION:
This wall mount is intended for use
only with the maximum weight of
45 kg/100 lbs. Use with heavier
than the maximum weights
indicated may result in instability
causing possible injury. Follow
the installation and operation
instructions carefully.