RCA RCR412BR Owner/User Manual - Page 2

5. When your device turns off, press the REVERSE key on the remote and wait at least 2 seconds. The remote tries the last of the previous ten codes. Did your device turn on? YES: Press the STOP key. You're done! You've programmed this device key. NO: Press REVERSE again. The remote tests the next code in the batch. Keep pressing REVERSE every 2 seconds until your device turns back on. When it does, press STOP. Note: If you accidentally press the REVERSE key after your device turns on, press the FORWARD key. Then, wait two seconds to see if your device turns off again. Brand Code Search The Brand Code Search goes through only the codes for one of the select brands listed in the accompanying code list. If your brand of device is listed, this search can be very quick and easy. TIPS: Each device key is associated with a type of device- the TV is preset to search for TVs, SAT•CBL•DTC for satellite receivers, cable boxes or digital TV converters, DVD for DVD players, and VCR•AUX for VCRs or DVRs. To program a device key for a different type of device, see the Changing a Key's Device Type section. The ON•OFF key serves as an indicator light during programming, giving you feedback at each stage of the process. To exit without saving a new code at any point in the Brand Code Search, press the GO BACK key. NOTES Throughout the programming of each key, be sure to keep the remote pointed at the IR sensor of the device you are currently programming the remote to control. Test the remote with the device to make sure the device key is programmed with the correct code for maximum functionality. If some features don't work, try a different code. See the "Testing the Code for Maximum Functionality" section below for more information. During the Auto Code Search, the remote ignores keypresses that aren't part of the search. The search times out after two minutes (the ON•OFF key blinks four times and turns off, and the last programmed code under that device key is retained). The ON•OFF key blinks four times and turns off when the remote has gone through all the codes. The remote exits the Auto Code Search. If your device hasn't turned off yet, try a different search method. 1. Manually turn on the device you want to control. 2. Find your device's brand in the Brand Code list section of the accompanying code list. Circle the number for your brand and keep the list handy. LCisotdaedLeisCtósdigos V 9 8 7 6 5 4 3 2 1 0 VCR 9 8 7 6 5 4 3 2 1 DVD 0 9 8 7 6 5 4 3 2 1 0 A /CABLE 9 8 7 6 5 4 3 2 1 0 3. Press and hold the device key you want to program. While you're holding down the device key, use your other hand to press and hold the remote's ON•OFF key at the same time. Testing the Code for Maximum Functionality 1. Try a variety of the device's functions with the remote. If some device features don't work, go to next step to try a different code. 2. Repeat the Auto Code Search Method from the beginning. When your device turns off, do not stop searching. Instead, with the unit now off, continue to press the PLAY key every 5 seconds until the unit turns back on. 3. Once the unit turns back on, press the REVERSE key on the remote every 2 seconds until your device turns off again. When your device turns off again, press the STOP key. 4. Test the key's functionality again by attempting to control a variety of the device's functions. If the code that has been stored controls the majority of the device's functions, programming is complete. If the code stored does not give maximum functionality, try another code. 4. Wait until the ON•OFF key comes on and stays on. Then release both keys. 5. Look at the number you circled for your device's brand code number. Press that number on the remote keypad. 6. Point the remote directly at the front panel of the device you want to control. Press ON•OFF on the remote and wait 2 seconds. The remote is testing a single code for your device's brand. Did your device turn off? YES: Press the STOP key to store the code. You're done! You've programmed this device key. NO: Press ON•OFF again. The remote tests the next code for your brand. Keep pressing ON•OFF every 2 seconds until your device turns off. When it does, press STOP.