RCA RCR412SIR Warranty Card

Care and Maintenance

environments.

looking new.

cause malfunction and invalidate its warranty.

Code Retrieval

Once you’ve programmed the remote to control your devices,

you may want to record the codes for future reference. If

you used the Direct Code Entry method, this is easy. Just

find the codes you entered and make a note of them in the

boxes below. If you used one of the Code Search methods to

program your remote or if you used the Direct Entry method

but don’t remember the code, you will need to retrieve each

device’s five-digit code. Retrieving the actual code and writing

it down will save you time if you ever need to program the

remote again (e.g., if programming is lost when you change

the batteries). If the codes are recorded, you can use the

Direct Entry method to reprogram your remote to control your

devices, which is quick and easy.

1.

Press and hold the device

device key.

Problem: The remote does not operate your device.

This tells the remote which device to operate.

sure you’re aiming the remote at the device’s IR sensor.

Replace the batteries with two new AA batteries, if necessary

(see the Battery Installation section).

Problem: The remote can’t be programmed to operate your

device.

too far away from the device or at a wrong angle. There must be

an unobstructed path between the remote and the IR sensor on

the device. Move closer and make sure you point the remote at

the device you’re trying to control.

the codes for your brand and the unit is still not functioning

properly, try the auto, brand, or manual search method.

program the individual corresponding device keys to control

each part of the combo unit. Once programmed successfully, the

controls the VCR or DVD functions.

Problem: The remote doesn’t perform commands properly.


disc loaded).

requirement of certain models and brands.

able to control some of your device features (for example, only

turns a device on and off). To confirm that the device key is

programmed with the correct code for maximum functionality,

test the device. Attempt to control a variety of the device’s

functions with the remote. If some of the features of your

devices don’t work, try programming the remote with a different

code in the list using the Direct Code Entry Method, until you

find the code that allows the remote to control the majority of

your device’s functions. Different codes can provide different

levels of functionality.

in.


Replace the batteries with two new AA batteries, if necessary

(see the Battery Installation section).


sure to aim the remote at the IR sensor on the device.

Problem: The device’s menu does not appear on the TV screen.

selected the correct input. (See your devices’ Owner’s Manuals for

proper connection procedures.)


your original remote control to access menu functions for some

devices.

Consumer Help Line: 1-800-420-7968

Audiovox Electronics Corporation (the “Company”) warrants to you the

original retail purchaser of this product that should it, under normal use

and conditions, be proven defective in material or workmanship during

its lifetime while you own it, such defect(s) will be repaired or replaced

(at the Company’s option) without charge for parts and repair labor. To

is to be delivered with proof of warranty coverage (e.g. dated bill of sale),

specification of defect(s), transportation prepaid, to the Company at the

address shown below.

not extend to costs incurred for installation, removal or reinstallation of

the product has been damaged through alteration, improper installation,

mishandling, misuse, neglect, accident, or the simultaneous use of different

battery types (e.g. alkaline, standard or rechargeable).

LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO

to assume for the Company any liability other than expressed herein in

connection with the sale of this product.

Some states/provinces do not allow limitations on how long an implied

warranty lasts or the exclusion or limitation of incidental or consequential

damage so the above limitations or exclusions may not apply to you. This

which vary from state/province to state/province.

U.S.A.:

Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge,

New York 11788

CANADA:

Trademark(s) ® Registered

©2010 Audiovox Accessories Corporation

111 Congressional Blvd., Suite 350

Carmel, IN

46032

Troubleshooting

Limited Lifetime Warranty

3

DVD CODE

5

SAT•CBL•DTC CODE

1

TV CODE

SAT

CABLE

DTV CONVERTER

Note:

All TV codes begin with the number 1; all VCR and DVR

codes begin with the number 2; all DVDs, the number 3; and

the number 5.

5.

Repeat step 4 until you have retrieved all five numbers in

key blinks briefly, then turns off.

TIP:

Note:

If you press an invalid key during the Code Retrieval

process, the remote will not respond. If you do not press a

on.

4.

Starting with the number 1 key, press and release each

number key on the keypad in the following order: 1-9, then

first number of the code. As you find each number of the

code, write it down for future reference.

VCR•AUX CODE

DVR/VCR

DVD

TV

RCA RCR412SIR Warranty Card

RCA RCR412SIR Manual

RCA RCR412SIR manual content summary: