RCA RCR504BR Warranty Card

SAT

•

CBL• DTC

VCR

DVD•AUX

TV

Battery Installation

Your

RCR504BR

universal remote requires 2 new AAA alkaline batteries

(sold sepa-

rately).

To install the batteries:

1.

Turn the unit over, and remove the battery compartment cover.

2.

Insert the batteries, matching the batteries to the (+) and (-) marks inside

the battery case.

Battery Precautions:

• Do not mix old and new batteries.

• Do not mix alkaline, standard (carbon-zinc) or rechargable (nickel-cadmium) batteries.

• Always remove old, weak or worn-out batteries promptly and recycle or dispose of them in

accordance with Local and National Regulations.

Programming with Direct Entry

To program your remote to control up to four

components, follow these steps:

1. Manually turn on the component you wish to

program the remote to operate.

2. Find the four-digit code for your brand of TV,

VCR, DVD, satellite receiver, cable box, or

digital TV converter in the enclosed code lists.

3. Press and hold the

CODE SEARCH

key until the indicator light turns on.

4. Release the

CODE SEARCH

key.

5. Press and release the

TV, VCR

or

SAT·CBL·DTC

key. The indicator light

blinks and then remains lit.

Note:

DTC references digital TV converter.

To program the

DVD·AUX

key:

Press the

DVD·AUX

key.

The indicator light continues

to blink until you select the component

you want the

DVD·AUX

key to control. To

control a DVD, press the

VCR

key. To control

a TV, press the

TV

key. To control a satellite

receiver, cable box, or digital TV converter,

press the

SAT·CBL·DTC

key. The indicator

light stops blinking and remains lit.

6. Enter the four-digit code, using the numeric

keypad. After the code is entered, the

indicator light turns off.

Note:

If the indicator light blinks multiple times, you’ve

entered an invalid code. Start from step 2 again.

7. Aim the remote at the component and

press the

ON·OFF

key. The component

should turn off.

Note:

If your component does not respond, try all the

codes for your brands. If the codes do not work or your

brand is not listed, try the Code Search Method that

follows.

INDICATOR

LIGHT

SAT

•

CBL• DTC

VCR

DVD•AUX

TV

CODE

SEARCH

ON•OFF

(OFF)

(BLINK)

Audiovox Electronics Corporation warrants that for 90 days from date of purchase, it will

replace this product if found to be defective in materials or workmanship. Return it to the

address below for a replacement with a current equivalent. This replacement is the company’s

sole obligation under this warranty. ANY IMPLIED WARRANTY OF MERCHANTABILITY

OR FITNESS FOR A PARTICULAR USE IS DISCLAIMED. This warranty excludes defects or

damage due to misuse, abuse, or neglect. Incidental or consequential damages are disclaimed

where permitted by law. This warranty does not cover product purchased, serviced or used

outside the United States or Canada.

U.S.A.:

Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge, New York 11788

CANADA:

Audiovox Return Center, c/o Genco, 6685 Kennedy Road, Unit 3, Door 16,

Mississauga, Ontario

L5T 3A5

ENGLISH

2

ENGLISH

3

ENGLISH

4

The Menu function on your remote is used to make changes on selected settings.

The

MENU

key operates in TV, VCR, DVD and SAT•CBL•DTC Modes. Each menu

varies from brand to brand.

The TV Menu is used to make changes in the TV settings, such as changing color,

channels and timers.

The SAT•CBL•DTC Menu navigates through the Menu

screens to make changes to settings. The VCR or DVD Menu you can navigate to

languages, subtitles and more.

While in Menu Mode, these keys function as follows:

Mode

Vol up/ down

Ch +/-

TV, SAT•CBL•DTC,

VCR, DVD

Cursor moves right/left

Cursor moves up/down

3.

To exit the menu mode press the correspond-

ing component key on the remote (

TV, VCR,

DVD·AUX

or

SAT·CBL·DTC

).

Special Notes for Menu Use

1.

In the Menu Mode of RCA, GE and PROSCAN TVs, pressing the

MENU

key selects

the highlighted item. The numeric keys may also be used to select the menu choice.

2.

For SONY components, pressing the

ENTER

key while in Menu Mode returns

to the previous menu.

If your TV, VCR, DVD, satellite receiver, cable box, or digital TV converter does not

respond after you have tried all the codes for your brands, or if your brand is not

listed, try searching for your code via the Code Search Entry Method. To program

your remote via the Code Search Entry Method, follow these steps:

INDICATOR

LIGHT

CODE

SEARCH

1.

Manually turn on the component you

wish to program the remote to operate.

2. Press and hold the

CODE SEARCH

key until the indicator light turns on.

3. Release the

CODE SEARCH

key.

4.

Press and release the component key you

wish the remote to control—

TV, VCR

or

SAT·CBL·DTC

key. The indicator light

blinks once and remains lit.

Important:

Find the ENTER key on your remote

(don't press it yet). You will need to press this key

quickly in step 6 below.

To program the DVD·AUX key:

Press the

DVD·AUX

key, followed by the component

key you wish the

DVD·AUX

key to control.

For DVD, press the

DVD·AUX

key, followed

by the

VCR

key. For an auxiliary

component, press the

DVD·AUX

key,

followed by the corresponding component

key (

TV, VCR, SAT·CBL·DTC

).

5. Press and release the

ON·OFF

key until

the component turns off.

Important:

You may have to press the

ON·OFF

key

up to 200 times.

ON•OFF

(OFF)

ENTER

Programming With Code Search

Menu Function – TV, VCR, DVD, SAT•CBL•DTC

90 Day Limited Warranty

ENGLISH

(BLINK)

Care and Maintenance

•

Keep the remote dry. If it gets wet, wipe it dry immediately.

•

Use and store the remote only in normal temperature environments.

•

Handle the remote gently and carefully. Don't drop it.

•

Keep the remote away from dust and dirt.

•

Wipe the remote with a damp cloth occasionally to keep it looking new.

•

Modifying or tampering with the remote's internal components can cause malfunction

and invalidate its warranty.

SAT

•

CBL• DTC

VCR

DVD•AUX

TV

To use the Menu function, follow these steps:

1.

Press the component button whose menu

you wish to access (

TV, VCR, DVD·AUX

or

SAT·CBL·DTC

).

2.

Press the

MENU

key. The menu of the chosen com-

ponent is shown.

Note:

Some functions of some brands may not be fully supported.

SAT

•

CBL• DTC

VCR

DVD•AUX

TV

MENU

The INPUT and — (dash) key lets you enter a digital sub-channel number, like 59.1,

directly. Use the number keys to enter the main channel number (in this case, “59”).

Then press the INPUT (–) key and press the subchannel number (in this case, “1”). The

INPUT key has two other functions as well: (1) it toggles through all the video sources

connected to your TV; and (2) when the remote is in VCR mode, this button toggles

between VCR and the TV input.

Accessing Digital Channels

6. As soon as the component turns off, press the

ENTER

key within 4 sec-

onds. The indicator light turns off.

Note:

If you wait longer than 4 seconds to press ENTER, the remote goes to the next code—you

will need to start the code search from step 1 again.

RCA RCR504BR Warranty Card

RCA RCR504BR Manual

RCA RCR504BR manual content summary: