RCA RCU404 Owner/User Manual: RCU404 - Page 11

RCU404_US_IB_REVB 7/16/03 15:34 Page 11 (BLINK) 5. The number that causes the indicator light to blink is the first digit of your code. 6. Repeat step 4 until you have retrieved all three numbers of the code. 7. Refer to the code box to write down the code for your component within the Direct Entry Section (pages 5-8) for the component just programmed. Sleep Feature This feature will automatically turn off your TV at a duration you choose from 1 to 99 minutes. PROGRAMMING SLEEP FEATURE INDICATOR 1. Press and hold the SLEEP key SLEEP LIGHT until the indicator light illuminates. Release the SLEEP key. 123 456 789 0 2. Enter time in minutes using the numerical key pad. The indicator light should turn off. (Minute 1 thru 9: press 0 before the actual number. Maximum: 99 minutes). 3. Leave remote aimed at television. (Sleep Feature will not work unless remote is left aimed at television). SLEEP (BLINK) OR ON•OFF CANCELING THE SLEEP TIMER The Sleep Timer program will be canceled and reset to zero by either of the following. 1. Press and hold the SLEEP key until the indicator light blinks. 2. Press the ON•OFF key, turning the TV off. Using On-screen Menus This remote cannot access every menu system of all models and brands of consumer electronics components. However, if you've successfully programmed the DVD•AUX key to operate a DVD player, you can access DVD disc menus with the MENU key. The MENU key will also access TV menu systems for most RCA, GE and PROSCAN TV's, as well as some other popular brands. Also, some RCA VCR menus are supported by this remote's menu key. This remote also supports select satellite receiver menus. If this remote's MENU key doesn't access the menu system for your component, you'll need to use the original remote to change menu settings. Note: This remote's MENU key doesn't support cable box menu systems and some VCR menu systems. 11