RCA RCU404 Owner/User Manual: RCU404 - Page 5

RCU404_US_IB_REVB 7/16/03 15:34 Page 5 Program for TV- Direct Entry Method In order for the 4 component universal remote to control your TV, you must program it with the TV code that matches your TV. These instructions explain the preferred method of programming the remote-the Direct Entry method. CODE INDICATOR SEARCH LIGHT TV (BLINK) 123 456 789 0 (OFF) ON•OFF TV CODE 1. Manually turn on the TV. 2. Locate the enclosed TV Code List. Find your brand of TV. Note: If your brand isn't listed, use one of the Code Search methods to program this remote control (See Code Search on page 9). 3. Press and hold the CODE SEARCH key until the indicator light illuminates. Then release the CODE SEARCH key. 4. Press and release the TV key. The indicator light blinks and then remains lit. 5. Use the number keys to enter the first code listed for your brand. After you enter a valid three-digit code, the indicator light turns off. Note: If you enter an invalid code, the LED will flash rapidly for 2 seconds. Start over at step 3. 6. Aim the remote at your TV and press the ON•OFF key. If your TV turns off, you have found the correct code. 7. Enter the code in the box provided on this page for future reference. 8. If your TV doesn't turn off, repeat steps 3-6 above, entering the next code for your brand. If none of the codes work or your brand is not listed, use one of the Code Search methods to program this remote (See Code Search on page 9). For a description of each key on the remote control, refer to the Key Descriptions section on page 3-4. 5