RCA RCU404 Owner/User Manual: RCU404 - Page 6

RCU404_US_IB_REVB 7/16/03 15:34 Page 6 Program for VCR- Direct Entry Method In order for the 4 component universal remote to control your VCR, you must program it with the code that matches your VCR. These instructions explain the preferred method of programming the remote-the Direct Entry method. 1. Manually turn on the VCR. 2. Locate the enclosed VCR Code List. Find your brand of VCR. CODE INDICATOR SEARCH LIGHT Note: If your brand isn't listed, use one of the Code Search methods to program this remote control (See Code Search on page 9). 3. Press and hold the CODE SEARCH key until the indicator light illuminates. VCR (BLINK) Then release the CODE SEARCH key. 4. Press and release the VCR key. The indicator light blinks and then remains lit. 123 456 789 0 5. Use the number keys on the remote to enter the first code listed for your brand. After you enter a valid three-digit code, the indicator light turns off. Note: If you enter an invalid code, the LED will flash rapidly for 2 seconds. Start over at step 3. (OFF) ON•OFF 6. Aim the remote at the VCR. Press the ON•OFF key. If your VCR turns off, you have found the correct code. 7. Enter the code in the box provided on this page for future reference. VCR CODE 8. If your VCR doesn't turn off, repeat steps 3-6 above, entering the next code for your brand. If none of the codes work or your brand is not listed, use one of the Code Search methods to program this remote (See Code Search on page 9). For a description of each key on the remote control, refer to the Key Descriptions section on page 3-4. 6