RCA RT2380BK User Manual - Page 16

B_RT2380 EN 4/7/04 1:44 PM Page 17 Operating Your Receiver Switching the unit on and off • To switch on the receiver, press the STANDBY/ON button on the main unit once, or the ON•OFF button on the remote control. Example 1: If you have connected a DVD player to the DVD input (audio + video) on the receiver, press the SOURCE EN buttons on the main unit repeatedly until DVD is selected or press DVD•6CH on the remote control to receive the sounds and images transmitted by the DVD. • Standby: when the receiver is in tuner mode, press the STANDBY/ON button once to enter standby mode. On the remote control, press the ON•OFF button twice within 2 seconds if the receiver is not in Tuner source mode to enter standby mode. To avoid entering standby mode when powering up the unit, do not press the ON•OFF button twice within 2 seconds. • The receiver draws a small amount of electricity when in standby mode. Unplugging the unit from the wall socket will stop the draw. Example 2: Based on the example 1, the DVD is playing , if a VCR is connected to the VCR input (audio + video) of the receiver, press the SOURCE buttons on the main unit repeatedly until VCR is selected or press AUX 1 (VCR) on the remote control. The image and sound from the VCR source will replace the DVD. Selection of Audio/Video source When one of the source button is pressed, the audio and video input corresponding to the name will be activated. The receiver acts as a switching device between all the sources that are plugged into it. 13