RCA RT2380BK User Manual - Page 18

B_RT2380 EN 4/7/04 1:44 PM Page 19 Operating your Receiver Using the receiver to play a source After having properly connected a source (DVD, CD, VCR) to the receiver, you can partly control them through the receiver. 7. Set the sound Mode if needed (see "Advanced sound control" for details). EN Example 1: To play Dolby Prologic II Movie sound Press the SURROUND buttons until "Dolby PL II Playing a DVD with the receiver MOVIE" appears on the Display and all of the speaker'' icons light up. 1. Connect a DVD player to the receiver (see connecting your receiver for details). Example 2: LD: You may need to select a different Audio Channel NOTE on your LD (refer to your LD player manual). 8. Adjust the volume knob accordingly. To play Dolby Digital sound, the source must be connected to the receiver via the optical or coaxial terminal NOTE 2. Press ON/STANDBY on the main unit or press ON•OFF on the remote control to switch on the receiver. 3. Press the SOURCE buttons on the main unit or DVD•6 CH on the remote control to select the DVD source. 4. Switch ON the DVD player and start playback. 5. Switch ON your TV. 6. Select the appropriate A/V channel on the TV (refer to your TV manual for details) until the image from the DVD player is displayed. To receive VCR signal for recording, you must connect analog output from DVD/CD/SAT/TV to the analog input of the receiver. 15