RCA RT2380BK User Manual - Page 19

B_RT2380 EN 4/7/04 1:44 PM Page 20 Operating your Receiver Operating the Radio The receiver has a built-in tuner that allows for AM/FM radio function. Manual tuning 1. Connect the FM and AM antenna accordingly (see "Connecting the Antenna" on page 5 section for details) 2. Press ON/STANDBY on the main unit or ON•OFF on the remote control to switch on the receiver. Automatic Tuning Press and hold TUNER - or TUNER + for about one second to activate the automatic SEARCH function. The receiver will automatically tune frequencies until it finds a station. NOTE 3. Press the SOURCE buttons on the main unit until the tuner mode is selected or press TUNER on the remote control. 1. If there is interference, move the location of the antenna until the optimal sound is heard. TV and other electronic devices could be the cause of interferences so try to position the antenna away from them. 2. Weak signal can affect the "auto Search function". Adjust the antenna for better reception and for a more efficient search. Select a sound effect if needed by pressing the SURROUND button. (see "Advance sound section" for details). 4. To select between FM and AM band, press the TUNER button repeatedly. 5. Tune to a station by pressing TUNER - or TUNER + repeatedly until the desired station is found. Selecting Mono or Stereo Sound Press the ST•MONO button on the remote control to toggle between mono and stereo sound in FM tuner mode (when available). 16