RCA RTB1023 RTB1023 Product Manual - Page 10

Connections and Setup Connecting the Speakers Speaker wires are color-coded to match the terminals. Connect the speaker wire from the back of each speaker to the corresponding color terminal at the back of the unit. Press down the tab to open the terminal and insert the wire. Release the tab to lock wire in the terminal. Subwoofer Center Speaker Front Speakers Green and Black Purple and Black Right Left Red and White and Black Black SPEAKERS 3 6 6 3 Insert Press Gray and Black Right Blue and Black Rear Speakers (Surround Sound) Left Release To adjust each speaker volume level for optimum listening experience. 1) Press LEVEL button on the remote control to select FL (front Left speaker) on the unit display. 2) Press or buttons to adjust the value up or down (between -10dB and +10dB). 3) Repeat step (1) and (2) for the other speakers FR, CT, SW, SL, SR. Speaker gains may be set to levels of up to +10dB, actual max levels may also depend on your Volume Setting. Note: When connecting the speakers, make sure the polarities ("+" speaker wire to "+" on the receiver) of speaker wires and terminals match. For example, red wire to red terminal on the receiver. If the cords are reversed, the sound will be distorted. Do not let the speaker wires touch each other, it will damage the system's amplifier. - 9 -