RCA RTB1100 RTB1100 Quick Setup Guide

AVC Multimedia

Markham, Ontario L3R 1E3

Made in China / Fabriqué en Chine

Fabricado en China

RTB1100

AC 120V

60Hz

USB TERMINAL:DC 5V

500mA

Cinéma Maison avec

Lecteur Blu-ray

Blu-ray Home Theater

Teatro en Casa Blu-ray

Quick Setup Sheet

RTB1100

Congratulations on purchasing your new RCA product.

Please read these instructions for quick setup sheet on using the product.

VOLUME +/- Buttons

Adjusts the volume.

REAR

VIEW

FRONT

VIEW

Blue Speaker Terminals

Connect the blue and

black wires from

Rear Left

Speakers

(surround sound)

to the terminals.

Notes:

1.

The AC power plug is polarized

(one blade is wider than the

other) and only fits into AC

power outlets one way. If the

plug won’t go into the outlet

completely, turn the plug over

and try to insert it the other way.

2. The HDMI output will give

you the highest quality video

connection.

3.

To receive clear reception,

AM and FM antennas must be

hooked up.

Specifications and external appearance

are subject to change without advance

notice due to continuous product

improvement.

SOURCE Button

Selects the input sources. Press repeatedly

to select between:

• BD/USB

–

to

watch

BD/DVD

discs,

or

photos and video files stored on to a data

disc or USB flash drive.

• OPTICAL – to select the digital audio input.

• AUX – to select the analog audio input.

• TUNER – to listen to the radio.

Gray Speaker Terminals

Connect the gray and black

wires from

Rear Right

Speakers

(surround sound)

to the terminals.

Composite Video Out Jack

Use to connect the VIDEO OUT

jack on the back of the unit to

the Video IN jack on your TV

(shown as right) so that the

video content goes from the

unit to the TV screen.

TV

AUDIO IN Jack

Use to connect the AUDIO IN jacks on

the back of the unit to the AUDIO OUT

jacks on TV, VCR, SAT/Cable Box or

others (TV example shown here).

VCR

SAT/Cable Box

TV

Composite Video Out Jack

Use to connect

the COMPONENT VID

-

EO OUT jacks (Y, P

B

, P

R

) on the back

of the unit to the component video IN

jacks on your TV (shown at right) so

that the video content goes from the

unit to the TV screen.

TV

AM Loop Antenna

1. Uncoil the AM antenna wire.

2. Press down on the antenna tabs to open the terminals.

3. Insert the white wire on the AM loop antenna into the

AM loop terminal and the other into the ground(GND)

loop terminal. (See

Note 3

)

FM Antenna

Connect the FM

antenna to the FM

terminal.

AM

Antenna

FM ANTENNA

LAN (Ethernet) Jack

Use to connect an Ethernet cable (CAT5 or better with

RJ45 connector) to the ETHERNET jack on the back of

your player and to an Ethernet jack on a broadband hub

or router.

Hub or Network Router

White Speaker Terminals

Connect the white and

black wires from

Front Left

Speaker

to the terminals.

Optical In Jack

Use to connect the OPTICAL DIGITAL IN jack on

the back of the unit to the OPTICAL OUT jack on

TV, VCR, SAT/Cable Box or other component.

VCR

Game Console

TV

HDMI Out Jack

Use to connect

an HDMI cable from

HDMI IN jack on the TV to the HDMI

OUT jack on this unit.

(See

Note 2

)

AUDIO OUT Jacks

Use to connect

the AUDIO OUT jacks from

the unit to the AUDIO IN jacks on TV, VCR,

Stereo system or other audio component.

VCR

Stereo System

TV

STOP Button

Stops playback.

OPEN/CLOSE Button

Opens and closes the disc

tray.

PLAY/PAUSE Button

Starts/pauses playback.

Switches the unit on and off.

STANDBY/ON Button

USB Port

For connection of USB flash

drives.

Purple Speaker Terminals

Connect the purple and

black wires from

Subwoofer

Speaker

to the terminals.

Green Speaker Terminals

Connect the green and black

wires from

Center Speaker

to the terminals.

Red Speaker Terminals

Connect the red and black

wires from

Front Right

Speaker

to the terminals.

AC Power Cord

Connect the AC power

plug into the AC power

outlet. (See

Note 1

)

RCA RTB1100 RTB1100 Quick Setup Guide

RCA RTB1100 Manual

RCA RTB1100 manual content summary: