RCA RTD215 User Manual - RTD215 - Page 26

RTD215 EN 6/2/07 3:36 PM Page 28 The Setup Menu Video Progressive Function provides high quality EN pictures with less flickering. Turn on Progressive Scan if you used the Component Video jacks of the unit to connect a TV or monitor compatible with a progressive scan signal. Select ON and press OK to activate Progressive Scan. ! IMPORTANT! Once Progressive Scan has been activated, an image will only be visible on a progressive scan TV or monitor. If you choose this option and you do not have a progressive scan TV or monitor, you may get a picture with incorrect color or no color. Press and hold SUBWOOFER on the front panel. The video output will be restored to the standard setting and a picture will once again be visible on a conventional analog TV or monitor. Speaker Setup You can adapt your unit to other equipment and access specific functions with the Speaker Setup menu. 1. Select the Speaker Setup icon in the main menu using the left/right arrow buttons. 2. Select an option using the up/down arrow buttons. Press the right arrow to move to the option's choices. SPEAKER SETUP NIGHT MODE FL/FR DISTANCE CT DISTANCE SL/SR DISTANCE TEST TONE EXIT SETUP Night Mode You can use this function to control the different sound levels via dynamic compression. It improves the quality of the sound track at a low volume, and quiets the loudest sounds. You can choose between Quiet, Moderate or Off. Distance Basic settings have been preset for the speakers included with your unit. However, to suit the acoustic conditions in your listening room and to make the sound more effective, you may need to delay the signal coming from some of the speakers. Channel delay compensates for center or surround speakers that are closer to the listening position than the front speakers. 1. Highlight a distance option using the up/down arrow buttons. • Front (FL/FR DISTANCE) • Center (CT DISTANCE) • Surround (SL/SR DISTANCE) 2. Press the right arrow button to move to the default distance. 3. Press the up/down arrow buttons to adjust the distance. Test Tone This function is used to test the speaker setting and change the speaker level. A short noise comes successively from each speaker. Notes: • Night mode function is available only on DVD discs recorded in Dolby Digital. • The receiver speaker distance default settings are as follows: Front (FR/FL Dist.) 15 ft Center (Cen Dist.) 15 ft Surroudn (SR/SL Dist.) 10 ft 20