Reebok 710 Treadmill English Manual - Page 10

2. Make sure that the power cord is unplugged. 2 Locate the Upright Wire (81) bundled around the Base (86). Cut the plastic tie securing the Upright Wire. Route the Upright Wire out of the indicated hole. See the inset drawing. Cut the plastic tie near the Upright Wire (81). Be careful not to damage the Upright Wire. Press a Base Cap (82) into each side of the Base (86). 86 Cut 82 Hole 81 Tie Cut 81 3. Identify the Left Upright (79). Have a second person hold the Left Upright near the Base (86). 3 See the inset drawing. Tie the wire tie in the Left Upright (79) securely around the end of the Upright Wire (81). Then, insert the Upright Wire into the lower end of the Left Upright as you pull the other end of the wire tie through the Left Upright. 81 Wire Tie 79 Wire Tie 81 79 86 10