Ricoh 9100DN Software User Guide - Page 257
Setting Up as a Print Server (NetWare 4.x
UPC - 026649026164
View all Ricoh 9100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 257 highlights
Using NetWare • Print Server Protocol: Select the protocol for NetWare from the drop-down menu. • NCP Delivery Protocol: Select the protocol for NCP delivery. 5. Confirm the settings, and then click [OK]. Configuration is now complete. Wait several before restarting Web Image Monitor. 6. Click [Logout]. • To check that the configuration is made correctly, enter the following from the command prompt. F:> USERLIST • If the printer works as configured, the name of the print server appears as a connected user. • If you cannot identify the printer you want to configure, check the printer name with the config- uration page printed from the printer. For details about printing a configuration page, see p. 137 "List/Test Print Menu". • If no printer names appear in the list, match the frame types of IPX/SPXs for the computer and printer. Use the [Network] dialog box of Windows to change the frame type of the computer. 6 Setting Up as a Print Server (NetWare 4.x, 5/5.1, 6/6.5) Follow the procedure below to connect the printer as a print server using NetWare 4.x, NetWare 5/5.1, or NetWare 6.0. • When using the printer as a print server in NetWare 4.x, NetWare 5/5.1, or NetWare 6.0, set it to the NDS mode. • When using NetWare 5/5.1 or NetWare 6.0, set the printer as a print server. 1. Start Web Image Monitor. 2. Click [Login]. A dialog box for entering the login user name and password appears. 3. Enter the login user name and password, and then click [Login]. For details about the login user name and password, consult your administrator. 4. Click [Configuration] in the left area, and then click [NetWare Print Settings]. • Print Server Name: Enter the NetWare print server name. To use the interface board as a print server, enter the name of a print server that is not active on the file server. Use up to 47 characters. • Logon Mode: Specify whether to designate a file server or NDS tree when logging on to NetWare. • File Server Name: When a file server name is entered here, only the specified file server is searched for. This item is mandatory. Use up to 47 characters. 255