Ricoh Aficio MP 2000 Troubleshooting - Page 15

When a Job Is Not Performed When a Job Is Not Performed If you cannot execute a function, it may be that the machine is being held up by another function. 1 If you cannot execute a function, terminate any other functions currently active, and then try executing the function again. In some cases, you can carry out another job (copi- er, facsimile, printer, or scanner) without canceling the current job being performed. Performing multiple functions simultaneously like this is called "Multi-accessing". ❖ Combination Chart Mode after you select Copy Facsimile Transmission Printer Scanner Reception Print TWAIN Using the control panel Scanning Scanning Printing Receive Data Printing Received Data Memory Reception Immediate Transmission Scanning an Original for Memory Transmission Memory Transmission Transmission Operation Using the control panel Copying TWAIN Scanner Printer Facsimile Print Reception Transmission Mode before you select Using the control panel × Copy Copying × Transmission Operation Scanning an Original for Memory Transmission × Memory Transmission Immediate Transmission × Memory Reception Printing Received Data Receive Data Printing Using the control panel Scanning Scanning × × × × ×× ×× *1 ×× *1 *1 × × × × ××× *2 *2 *2 × *1 *1 ××××× × *1 × × ××× × ××× × × ...means that these functions can be used together. ...means that you can interrupt the current job with the function keys to proceed to a subsequent job. ...means that another job will automatically start after the current job is finished. ×...means that you must manually start another job after the current job is finished (i.e., these functions cannot be used together). *1 You can scan a document once the preceding job documents are all scanned. *2 During parallel reception, any subsequent job is suspended until reception is completed. 9