Ricoh Aficio MP 2000 Troubleshooting - Page 22
Combine - copier parts
View all Ricoh Aficio MP 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Troubleshooting When Using the Copy Function ❖ Edit Problem Cause Solution When using the Duplex You set a wide erased margin. Set a narrower margin with User Margin function, parts Tools. You can set the width be- of the original image tween 0 - 50 mm (0" - 2"). are not copied. See "Copier Features", General Settings Guide. 2 When using the Duplex There is a lack of margin space on Set a narrower margin with User Margin function, parts the opposite side of the binding Tools. You can set the width be- of the original image position. tween 0 - 50 mm (0" - 2"). are not copied. See "Copier Features", General Settings Guide. ❖ Combine Problem When using Combine, parts of the image are not copied. When using Combine, parts of the image are not copied. Copies are not in correct order. Cause Solution You specified a reproduction ra- When you specify a reproduction tio that does not match the sizes ratio using the Manual Paper Seof your originals and copy paper. lect function, make sure that the ratio matches your originals and the copy paper. (Select the correct reproduction ratio before using the Combine function.) Your originals are not identical in Use originals that are identical in size and direction. size and direction. You placed the originals in the in- When placing a stack of originals correct order. in the ADF or ARDF, the last page should be on the bottom. If you place an original on the exposure glass, start with the first page to be copied. 16