Ricoh Aficio MP 2000 Troubleshooting - Page 45
When a Message Is Displayed, Status Messages, Alert Messages
View all Ricoh Aficio MP 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
When a Message Is Displayed When a Message Is Displayed This section describes the principal messages that appear on the display panel. If a message not described here appears, act according to the message. Reference Before turning the main power off, see "Turning On the Power", About This Machine. Status Messages This section describes the machine status messages. Ready Message Status 4 This is the default ready message. The machine is ready for use. No action is required. Printing... The machine is printing. Wait a while. Waiting... The machine is waiting for the next data to print. Wait a while. Offline The machine is offline. To start printing, switch the machine online by pressing the {Online} Key. Please wait. This message may appear for a few seconds. It means the machine is initializing or executing maintenance operations. Wait a while. Resetting Job... The machine is resetting the print job. Wait until "Ready" appears on the display panel. Setting change... The machine settings are being changed. Wait a while. Hex Dump Mode In Hex Dump mode, the machine prints received data in hexadecimal format. Turn off the machine after printing, and then turn back on. Hex Dump mode is used for advanced troubleshooting. Alert Messages This section describes the machine alert messages. Message Problem:Wireless card Cause An error may have occurred in the IEEE 802.11b card. Solution Turn off the main power switch, and back on again. If the message appears again, contact your sales or service representative. Problem:Wireless board An error may have occurred in the IEEE 802.11b board. Turn off the main power switch, and back on again. If the message appears again, contact your sales or service representative. 39