Ricoh Aficio MP 2500 Troubleshooting - Page 63
Other printing problems, PCL 6/5e, Job Acceptance Priority
View all Ricoh Aficio MP 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Other Printing Problems Problem Cause Solution There is considerable delay between the print start instruction and actual printing. Processing time depends on data volume. High volume data, such as graphicsheavy documents, takes longer to process. If the Data In indicator is blinking, data has been received by the machine. Wait for a while. Making the following setting on the printer driver may reduce the computer's workload. For how to open the printing preferences dialog box, see "Setting Up the Printer Driver", Printer Reference. ❖ PCL 6/5e Select the lower value in the [Resolution] list on the [Print Quality] tab in the printing preferences dialog box. ❖ RPCS • In the [Change User Settings...] dialog box, on the [Im- age Adjustments] tab, select the lower value in the [Resolution:] list. 4 • In the [Change User Settings...] dialog box, on the [Image Adjustments] tab, Select [Fast] in the [Load document types:] list. To enable [Change User Settings...], select the [User settings] check box. See the printer driver Help. ❖ Other printing problems Problem Cause Solution The print job is not canceled even when the machine is switched to offline status. Even when the machine is offline, printing is performed when [Job Acceptance Priority] is selected for [Signal Control] in [Parallel Interface] in [Interface Settings] under [System Settings]. Select [Printer Priority] for [Signal Control]. See "Interface Settings", General Settings Guide. Images are incomplete, or excess pages are printed. You may be us- Use the same size paper as that selected in the application. ing paper small- If you cannot load paper of the correct size, use the reducer than the size tion function to reduce the image, and then print. selected in the See the printer driver Help. application. Duplex printing is malfunctioning. Duplex printing cannot be done with paper set in the bypass tray. When using duplex printing, make settings to use paper from a tray other than the bypass tray. Duplex printing is malfunctioning. You have loaded thick paper, OHP transparencies, or labels specified as the paper type. Specify another paper type. 55