Ricoh Aficio MP 5002 User Guide - Page 162
Tray Paper Settings, Connecting the, Size That Is Not Automatically
View all Ricoh Aficio MP 5002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
10. Troubleshooting Problem Misfeeds occur frequently. Misfeeds occur frequently. Misfeeds occur frequently. Cannot print in duplex mode. Causes Solutions The tray's side or end fences may not be set properly. • Remove misfed paper. For details about removing jammed paper, see "Removing Jammed Paper", Troubleshooting . • Check that the side or end fences are set properly. Also, check that the side fences are locked. For details about setting the side and end fences, see "Changing the Paper Size", Paper Specifications and Adding Paper . Paper of undetectable size has been loaded. • Remove misfed paper. For details about removing jammed paper, see "Removing Jammed Paper", Troubleshooting . • If you load a paper size that is not selected automatically, you need to specify the paper size with the control panel. For details about specifying paper size with the control panel, see "Changing to a Size That Is Not Automatically Detected", Paper Specifications and Adding Paper . There is a foreign object on the finisher tray. • Remove misfed paper. For details about removing jammed paper, see "Removing Jammed Paper", Troubleshooting . • Do not place anything on the finisher tray. You have selected a paper tray that is not set for duplex printing. Change the setting for "Apply Duplex" in System Settings to enable duplex printing for the paper tray. For details about setting the "Apply Duplex", see "Tray Paper Settings", Connecting the Machine/ System Settings . 160