Ricoh Aficio MP 5002 User Guide - Page 197
transmission from the printer, command to stop - pcl 5e driver
View all Ricoh Aficio MP 5002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
When Messages Are Displayed on the Control Panel Message Causes Solutions "Print overrun." Images were discarded while printing. PCL 5e Select a lower resolution on the printer driver. For details about how to change the resolution setting, see the printer driver Help. "Printing privileges have not been set for this document." The PDF document you have tried to print has no privileges to print. Contact the owner of the document. "Punch has been cancelled." Punch printing was canceled. Check the paper orientation, print orientation, and then punch position. Certain settings can produce print results that might not be as expected. "Receiving data failed." Data reception was aborted. Resend the data. "Selected ppr. size is not supported. Job was cancelled." Job reset is automatically performed if the specified paper size is incorrect. Specify the correct paper size, and then print the file again. "Sending data failed." The machine received a command to stop transmission from the printer driver. Check if the computer is working correctly. "Staple has been cancelled." Stapling printing was canceled. Check the paper orientation, paper quantity, print orientation, and staple position. Certain settings can produce print results that might not be as expected. "The print job has been cancelled because capture file(s) could not be stored: Exceeded max. memory." The hard disk became full after a file was stored. Delete the files stored in the Document Server or reduce the file size to be sent. "The print job has been cancelled because capture file(s) could not be stored: Exceeded max. number of files." The maximum file capacity Delete the files stored in the Document of the Document Server was Server. exceeded. 195