Ricoh Aficio MP 6000 General Settings Guide - Page 34
Effective Protocol, Active, IEEE 802.11b, LAN Type, Delivery Option
View all Ricoh Aficio MP 6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Connecting the Machine Reference p.49 "Interface Settings" p.56 "File Transfer" 1 IEEE 802.11b (wireless LAN) This section lists the settings required for delivering data to network with an IEEE 802.11b (wireless LAN) connection. For details about specifying the settings, see "Interface Settings" and "File Transfer". Heading Setting Item Interface Settings/Network Machine IPv4 Address Interface Settings/Network IPv4 Gateway Address Interface Settings/Network DNS Configuration Setting Requirements Necessary As required As required Interface Settings/Network DDNS Configuration As required Interface Settings/Network Domain Name As required Interface Settings/Network WINS Configuration As required Interface Settings/Network Effective Protocol Interface Settings/Network LAN Type Interface Settings/Network Permit SNMPv3 Communication Interface Settings/Network Permit SSL / TLS Communication Interface Settings/Network Host Name Interface Settings/IEEE 802.11b Communication Mode Interface Settings/IEEE 802.11b SSID Setting Interface Settings/IEEE 802.11b Channel Interface Settings/IEEE 802.11b Security Method Interface Settings/IEEE 802.11b Transmission Speed Necessary Necessary As required As required As required Necessary As required As required As required As required File Transfer Delivery Option As required File Transfer Fax RX File Transmission As required File Transfer Scanner Resend Interval Time As required File Transfer Number of Scanner Resends As required Note ❒ As to [Effective Protocol], check if the protocol to use is set as [Active]. ❒ [IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN interface board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. ❒ If [Delivery Option] is set to [On], check that IPv4 Address is set. 24