Ricoh Aficio MP C305 Manuals - Page 185
Settings] tab, click [Print Quality], Raster] in the Vector/Raster - pcl 5c
View all Ricoh Aficio MP C305 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
When Messages Are Displayed on the Control Panel Message "Insufficient Memory" "Memory Retrieval Error" "No response from the server. Authentication has failed." "Output tray has been changed." Causes Solutions A memory allocation error occurred. PCL 5c Select a lower resolution on the printer driver. For details about how to change the resolution setting, see the printer driver Help. PCL 6 Select a lower resolution on the printer driver. For details about how to change the resolution setting, see the printer driver Help. On the printer driver's [Detailed Settings] tab, click [Print Quality] in "Menu:", and then select [Raster] in the "Vector/Raster:" list. In some cases, it will take a long time to complete a print job. PostScript 3 Select a lower resolution on the printer driver. For details about how to change the resolution setting, see the printer driver Help. A memory allocation error occurred. Turn off the main power switch, and then back on again. If the message appears again, replace the RAM. For details about replacing the RAM, contact your service representative. A timeout occurred while connecting to the server for LDAP Authentication or Windows Authentication. Check the status of the server. The output tray was changed because the paper size of the specified output tray is limited. Specify the proper output tray. 183