Ricoh Aficio MP C4502 General Settings Guide - Page 101
Input/Output
View all Ricoh Aficio MP C4502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Input/Output Input/Output This section describes the user tools in the Input/Output menu under Copier / Document Server Features. Default settings are shown in bold type. ❖ Switch to Batch You can select to have Batch mode or SADF mode displayed when you press the [Special Original] key. The default setting is Batch. 3 ❖ SADF Auto Reset When you set one original at a time in the ADF, the Auto Feed indicator lights for a specified time after an original is fed, to show the ADF is ready for an- other original. You can adjust this time from 3 to 99 seconds in increments of 1 second. The default setting is 5 seconds. ❖ Rotate Sort: Auto Paper Continue Specify to continue copying when paper of the required orientation has run out during rotate sort. The default setting is No. • Yes Copying continues using copy paper of a different orientation. The copy job will finish even if you have left the machine. • No When paper of the required orientation runs out, the machine stops copying and prompts you to supply copy paper. After you have loaded paper, the machine will continue copying. ❖ Auto Sort You can specify whether the Sort function is selected when the machine is turned on, or the functions are cleared. The default setting is No. ❖ Memory Full Auto Scan Restart When memory becomes full while scanning originals, the machine can make copies of scanned originals first, and then automatically proceed scanning remaining originals. The default setting is No. • Yes You can leave the machine unattended to make copies, but sorted pages will not be sequential. • No When memory becomes full, the machine stops operation allowing you to remove the copy pages delivered on the output tray. 93