Ricoh Aficio MP C4502 General Settings Guide - Page 133
Programming Changing and Deleting a, Scan Size
View all Ricoh Aficio MP C4502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Programming Changing and Deleting a Scan Size Programming Changing and Deleting a Scan Size This section describes how to program, change, and delete a Scan Size. When you select a scan size to scan a custom size original, two custom sizes are available (Program Size 1 and Program Size 2). Use these functions to program a custom size in advance. To change an existing scan size, just use the same procedure. Important ❒ When programming or changing a scan size, it is recommended that you make a record of the new size. You can program up to two sizes. 4 Specify a horizontal length from 128 to 1200 mm, or from 5.5 to 47 inches. A Press [Facsimile Features]. B Press [Administrator Tools]. C Press [Program / Change / Delete Scan Size]. D Select [Program Size 1] or [Program Size 2]. E Enter a horizontal size using the number keys. Each time you press [mm] or [inch], the units switch between "mm" and "inch". If you enter a length and press [mm] or [inch], the length is converted automatically according to the unit (fractions are rounded off). For example, when you enter {2}, {2}, and {0} in millimeters and change to "inch", the length "8.7 inch" is shown on the display. If you press [mm] or [inch] again, "221 mm" is displayed. If you make a mistake, press [Clear] or the {Clear/Stop} key, and then try again. To cancel a scan size, press [Cancel]. 125