Ricoh Aficio MP C4502 General Settings Guide - Page 20
System Settings, Interface Settings, IEEE 802.11b, Wireless LAN Signal, User Tools/Counter
View all Ricoh Aficio MP C4502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Connecting the Machine ❖ When using in ad hoc mode / 802.11 ad hoc mode 1 ZGDH600J 1. If it is connected properly to the network, the LED is green when in ad hoc mode or 802.11 ad hoc mode. If the LED is blinking, the machine is searching for devices. The LED will light after a few seconds. 2. If the IEEE 802.11b interface unit is functioning, the LED lights up in orange. Print the configuration page to verify settings. Note ❒ For more information about printing a configuration page, see "Print List". Reference p.170 "Printing the Configuration Page" Checking the Signal This section describes how to check the machine's radio wave status. When using in infrastructure mode, you can check the machine's radio wave status using the control panel. A Press [System Settings]. B Press [Interface Settings]. C Press [IEEE 802.11b]. D Press [Wireless LAN Signal]. The machine's radio wave status appears. E After checking radio wave status, press [Exit]. F Press the {User Tools/Counter} key to return to the User Tools / Counter / In- quiry menu. Reference p.30 "Using Utilities to Make Network Settings" p.55 "IEEE 802.11b" 12