Ricoh Aficio MP C4502 General Settings Guide - Page 30

Connecting the Machine Settings Required to Use Scan to Folder Function This section lists the settings required for sending files. 1 Ethernet This section lists the settings required for sending files with an Ethernet connection. For details about how to specify the settings, see "Interface Settings" and "File Transfer". Menu User Tool Interface Settings/Network IP Address Interface Settings/Network Gateway Address Setting Requirements Necessary Necessary Interface Settings/Network DNS Configuration As required Interface Settings/Network DDNS Configuration As required Interface Settings/Network Domain Name As required Interface Settings/Network WINS Configuration Interface Settings/Network Effective Protocol Interface Settings/Network Ethernet Speed Interface Settings/Network LAN Type Interface Settings/Network NCP Delivery Protocol Interface Settings/Network Permit SNMPv3 Communication Interface Settings/Network Permit SSL/TLS Communication Interface Settings/Network Host Name File Transfer Default User Name / Password (Send) As required Necessary As required Necessary As required As required As required As required As required File Transfer Scanner Recall Interval Time As required File Transfer Number of Scanner Recalls As required Note ❒ For the Effective Protocol setting, check that the protocol you want to use is set to [Effective]. ❒ [LAN Type] is displayed when the wireless LAN interface board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. Reference p.51 "Interface Settings" p.57 "File Transfer" 22