Ricoh Aficio MP C4502 General Settings Guide - Page 92
Front Margin: Top / Bottom
View all Ricoh Aficio MP C4502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Copier / Document Server Features Edit This section describes the user tools in the Edit menu under Copier / Document Server Features. Default settings are shown in bold type. Enter the width of the binding margin with the number keys as follows: • Metric version: 0-30 mm (in increments of 1 mm) • Inch version: 0"-1.2" (in increments of 0.1 inch) 3 Enter the width of the erased margin with the number keys as follows: • Metric version: 2-99 mm (in increments of 1 mm) • Inch version: 0.1"-3.9" (in increments of 0.1 inch) An image of approximately 1.5 mm (0.06") will not be displayed as the width of the separation line, when specifying solid or broken lines. ❖ Front Margin: Left / Right Specify left and right margins on the front side of copies in Margin Adjustment mode. The default setting is Left 5 mm (Metric version) / Left 0.2" (Inch version). ❖ Back Margin: Left / Right Specify left and right margins on the back side of copies in Margin Adjustment mode. The default setting is Right 5 mm (Metric version) / Right 0.2" (Inch version). ❖ Front Margin: Top / Bottom Specify top and bottom margins on the front side of copies in Margin Adjustment mode. The default setting is T / B 0mm (Metric version) / T / B 0.0" (Inch version). ❖ Back Margin: Top / Bottom Specify top and bottom margins on the back side of copies in Margin Adjustment mode. The default setting is T / B 0mm (Metric version) / T / B 0.0" (Inch version). ❖ 1 Sided→2 Sided Auto Margin: TtoT When using the 1 sided → 2 sided Duplex function, you can specify margins on the back side. The margin is set to the same value of "Back Margin: Left/Right". The default setting is Right 5 mm (Metric version) / Right 0.2" (Inch version). ❖ 1 Sided→2 Sided Auto Margin: TtoB When using the 1 sided → 2 sided Duplex function, you can specify margins on the back side. The value set for "Back Margin: Top/Bottom" is used. The default setting is T / B 0 mm (Metric version) / T / B 0.0" (Inch version). 84