Ricoh Aficio MP W3600 Troubleshooting - Page 31
Combine, Folding finisher, When You Cannot Make Copies As Wanted
View all Ricoh Aficio MP W3600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
When You Cannot Make Copies As Wanted Problem Cause Solution In Erase Border, Erase In- Originals are not side, or Erase Outside scanned correctly. mode, parts of the original image are not copied. Place the originals correctly. Parts of the image are not Print Position Adjust- copied. ment or Margin Adjust- ment mode is selected. Cancel Print Position Adjustment or Margin Adjustment mode. See "Margin Adjustment" and "Adjust Print Position", Copy/Document Server Reference. Parts of the image are not copied. You placed a custom size original. Enter the size of the original, or set the scanning area wider. See "Placing Custom Size Originals" and "Wide Scan", Copy/Document Server Reference. In Image Repeat mode, the original image is not copied repeatedly. You selected copy paper Select copy paper larger than the origithe same size as the orig- nals or select the proper reproduction inals, or you did not se- ratio. lect the proper reproduction ratio. ❖ Combine Problem Cause Solution When using Combine, parts of the image are not copied. You specified a reproduction ratio that does not match the sizes of your originals and copy paper. When you specify a reproduction ratio using Manual Paper Select mode, make sure that the ratio matches your originals and the copy paper. Select the correct reproduction ratio before using Combine mode. Copies are not in correct You placed the originals Start with the first page to be copied. order. in the incorrect order. ❖ Folding finisher Problem Cause Solution The folding finisher is not recognized (is offline). The folding finisher is turned off, or the folding finisher and the machine were not turned on in the correct order. If the folding finishers is offline, turn off the main power switches of both the machine and folding finisher, and then turn them back on again in the following order: folding finisher, and then the machine. Then check the folding finisher is online. "Please wait." ap- The folding finisher is offline. Turn off the main power switches of both pears on the display pan- the machine and folding finisher, and then el and printing cannot be turn them back on again in the following or- done. der: folding finisher, and then the machine. Then check the folding finisher is online. Cannot specify folding. Translucent paper or film has been selected. Translucent paper and film are not available for folding. They are delivered to the upper output stacker, but not folded. Select another paper type, and then specify folding. 2 25