Ricoh CL5000 Quick Installation Guide

Please read the Safety Information in Maintenance Guide 1 before using this machine. It

contains important information related to USER SAFETY and PREVENTING EQUIP-

MENT PROBLEMS.

QUICK INSTALLATION GUIDE

Open the left cover of the printer by pulling the

fasteners (

±

c

²

).

ZESX306E

Note

❒

The two round fasteners cannot be detached.

From the top, the development units are installed in the order of

black, yellow, cyan, and magenta.

ZESX307E

Remove all of the packing materials with red tags.

Four packing materials are connected together, and there are two

of them. Remove one by one from the top of the units by holding

the packing material, not the wire.

ZESX308E

Detach the connectors from the development

units from the top to the bottom by pressing the

sides of the connectors.

ZESX410J

MANUALS FOR THIS PRINTER

Quick Installation Guide (This manual)

Maintenance Guide 1

Maintenance Guide 2

Option Setup Guide

CD-ROM “Printer Drivers and Utilities”

CD-ROM “Operating Instructions”

CD-ROM “Document Management Utility”

Development Unit Test Print

Power Cable

Ferrite Core

Fuser Oil Unit

ZESX303J

Paper Feed Unit Labels

WHERE TO PUT THE PRINTER

The printer’s location should be carefully chosen

because environmental conditions greatly affect its

performance.

Warning

•

Confirm that the wall outlet is near the machine

and freely accessible, so that in event of an

emergency, it can be unplugged easily.

•

Only connect the machine to the power source

described on this manual.

•

Avoid multi-wiring.

•

Do not damage, break or make any modifications

to the power cord. Do not place heavy objects

on it, pull it hard or bend it more than necessary.

These actions could cause an electric shock or

fire.

Caution

•

Keep the machine away from humidity and dust.

A fire or an electric shock might occur.

•

Place the machine on a strong and level surface.

Otherwise, the machine might fall and result in

an injury.

•

If you use the machine in a confined space,

confirm that there is a continuous flow of air.

Optimum Environmental Conditions

Recommended temperature and humidity

32

˚

C

54%

27

˚

C 80%

10

˚

C 80%

32

˚

C 15%

10

˚

C 15%

%RH

80

60

40

15

10

20

30

˚

C

15

˚

C 70%

15

˚

C 30%

25

˚

C 30%

25

˚

C 70%

89.6

˚

F

54%

80.6

˚

F 80%

50

˚

F 80%

89.6

˚

F 15%

50

˚

F 15%

%RH

80

60

40

15

50

60

90

˚

F

59

˚

F 70%

59

˚

F 30%

77

˚

F 30%

77

˚

F 70%

70

80

Possible operation range

Recommended range

The machine must be level within 5 mm (0.2 inch) both front to

rear and left to right.

To avoid possible build-up of ozone, place this printer in a large well

ventilated room that has an air turnover of more than 30 m

3

(183

cubic inch)/hr/person.

If you use this printer in a cold area, leave the printer on or severe

cold might damage sensitive components inside the printer.

Depending on the temperature and humidity around the machine,

vapor might occur when printing. Thus steam can be seen when

prints come out.

Environments to Avoid

Important

❒

Locations exposed to direct sunlight or strong light

❒

Dusty areas

❒

Areas with corrosive gases

❒

Areas excessively cold, hot, or humid

❒

Locations near an air conditioner or humidifier

❒

Locations near other electronic equipment

❒

Locations where the printer might be subjected to

frequent strong vibration

Power Connection

Connect the power cord to a power source with the following

specifications:

❒

120 V, 60 Hz, 11 A or more-

Space Required for Installing the Printer

Leave enough space around the printer. This space is necessary to

operate the printer. The recommended (or minimum) space

requirement is as follows:

B

A

C

D

ZESX302E

A: 10 cm (4 inch) or more

B: 10 cm (4 inch) or more

C: 55 cm (22 inch) or more

D: 75 cm (30 inch) or more

UNPACKING THE PRINTER AND

CHECKING THE CONTENTS OF THE BOX

Caution

•

To prevent an injury, this printer should be lifted

by at least two people.

Check the contents of the box according to the

following list. If one or some items are missing,

please contact your sales or service

representative.

Important

❒

This package does not include an interface cable.

Please purchase one for use with your host

computer. See “Appendix” the in the Administrator

Reference.

Remove the plastic bag.

Lift the printer and move it to the place where

you want to install it.

When lifting the printer, pull out the holding handles from the sides

of the printer, and hold them with at least two people.

Important

❒

When installing the printer to a low position, be

careful not to get your hand or clothes caught under

the printer.

Return the grips into the printer.

Remove adhesive tapes and packing materials

from the printer.

Put the Paper Feed Unit label for Tray 1 on the

front of Tray 1.

ZESX433E

PREPARING THE

DEVELOPMENT UNIT

Warning

•

Do not incinerate spilled toner or used toner.

Toner dust is flammable and might ignite when

exposed to an open flame.

•

Disposal should take place at an authorized

dealer or an appropriate collection site.

•

If you dispose of the used toner containers

yourself, dispose of them according to the local

regulations.

Caution

•

Do not eat or swallow toner.

•

Keep toner (used or unused) and toner

cartridges out of reach of children.

•

Our products are engineered to meet the highest

standards of quality and functionality. When

purchasing

expendable

supplies,

we

recommend using only those provided by an

authorized dealer.

Follow steps

to

for each development unit

individually. Remove the development unit by

lifting it first as shown in the illustration (

±

c

²

).

ZESX411E

The illustration shows how to remove the black development unit.

The procedure is the same for all four colors.

Important

❒

Be sure to hold the unit with both hands, and then

pull it slowly.

Hold the development unit, and then shake it

about 10 times.

ZESXE414J

Important

❒

Hold the unit with the roller facing down.

❒

Do not add shocks to the unit.

❒

If you do not shake the unit well, it may take longer

for the machine to warm up when turned on.

❒

Do not touch the roller or the gears shown in the

illustration.

ZESX668E

<G071-7503B>

Confirm the label for the color, and then confirm

that the unit is securely fit in the stoppers.

ZESX650J

When there is a white line showing at the stoppers, reinsert the units.

Important

❒

If the development unit is not installed properly,

the printing quality may be poor.

Repeat steps

to

to set the rest of the

development units.

Insert the connectors to the development units

from the bottom (

±

) to the top (

³

) until they

click into place.

ZESX046E

Important

❒

Be sure that all four connectors are connected to

the development units. Turning on the power

without all four connectors connected to the units

may cause a printer malfunction.

Close the left cover of the printer by pushing the

fasteners (

²

) while holding the cover (

±

).

ZESX309E

Set the development unit by aligning the guides,

pushing towards direction (

±

), and then

inserting slowly until it stops (

²

).

ZESX412E

The illustration shows how to install the black development unit.

The procedure is the same for all four colors.

Note

❒

When installing the development unit, it may come

out a little. This is not a malfunction.

Ricoh CL5000 Quick Installation Guide

Ricoh CL5000 - Aficio Color Laser Printer Manual

Ricoh CL5000 manual content summary: