Ricoh FW780 Service Manual - Page 102
Service Program Mode Table, In the data colum - service manual
View all Ricoh FW780 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
3.1.2 Service Program Mode Table 1: A "*" before the mode number means that the mode can be accessed by custormers or sales representative. 2: In the data colum, the default value is printed in bold letters. The default settings for several items depend on the machine destination (refer to page 4-26.). Mode No. Fusing Temperature 1 (Normal) *1 Function Selects the fusing temperature for plain paper. Data 0: Mode 1 1: Mode 2 2: Mode 3 3: Mode 4 4: Mode 5 5: Mode 6 6: Mode 7 Fusing *2 Temperature 2 (High) Selects the fusing temperature for translucent 0: Mode 5 paper. 1: Mode 6 2: Mode 7 3: Mode 8 Fusing *3 Temperature 3 (Low) Selects the fusing temperature for translucent 0: Mode 2 film. 1: Mode 3 2: Mode 4 3: Mode 5 *4 Copy Count Up/Down Selects the copy count amount up or down. 0: Up 1: Down Beeper On/Off Selects if the beeper sounds or not. *5 0: On 1: Off 2: Only when the edge margin or paper length is changed continuously, the beeper is off. Paper Feed Out Waiting Time *6 Setting Selects the time to when the paper is automatically fed out after it has been set on the manual table, or after the Roll Feed Select key is pressed. 0: 2 minutes 1: 1 minute 2: 3 minutes 3: 4 minutes 4: 5 minutes Manual Feed Start Selects the time to when the registration 0: 2 seconds Time Setting roller starts rotating after the entrance sensor 1: 0.7 second detects the paper leading edge. 2: 1 second *7 3: 3 seconds 4: 4 seconds 5: 5 seconds A163 4-10 SM