Ricoh FW780 Service Manual - Page 105
Mode No., Function, Standard, 27 sheets, Main Motor Speed
View all Ricoh FW780 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Mode No. Function Roll Feeder To adjust the cutting length of 1100 mm in 45 Cutting Length Adjustment (1100 the plain paper mode. mm, Plain Paper) Data 0: Standard --50.0←0→ 50.0 mm Longer Shorter Roll Feeder To adjust the cutting length of 1100 mm in Cutting Length the translucent paper mode. 46 Adjustment (1100 mm, translucent Paper) Roll Feeder To adjust the cutting length of 1100 mm in Cutting Length the translucent film mode. 47 Adjustment (1100 mm, Translucent Film) 48 Not Used Main Motor Speed To change the main motor speed. Adjustment 49 0: Standard --9 ← 0 → 11 Slower Faster If the main motor speed is incorrect, PJ56 or PJ57 will be indicated when a long copy is made. In these cases this adjustment is required. Toner End Determines the possible number of copies 0: 27 sheets 50 Detection Setting (when A1 paper is used) after the toner near 1: 9 sheets end condition. 2: 18 sheets 3: 36 sheets Used Toner 51 Determines the total copy length before the toner overflow indicator lights. 0: 1220 1: 610 2: 915 3: 1000 4: 1464 5: 1830 6: 2000 7: 2440 8: No overflow indication 9: 10m (Should be used for test) Used Toner Counter 52 Indicates the copy length after clearing the tF=XX,XXX used toner counter. This counter is (Beeper) automatically cleared if the clear mode key is pressed after turning off and on the main switch in the full toner condition. SM 4-13 A163