Ricoh FW780 Service Manual - Page 350

INSTALLATION PROCEDURE - B047 model [E] [B] - B048 model - [F] [F] [C] [F] [B] [A] B047I500.WMF [E] [F] [D] [A] B048I502.WMF NOTE: The installation procedures are not shipped with the copier, always bring this manual with you. !CAUTION 1. Unplug the power cord before performing the following procedures. 2. Before starting the installation, make sure the machine is level. 3. The copier is very heavy (85 kg, 187 lbs). To avoid serious injury, make sure that you have a sufficient number of people to assist you. It takes at least two people to lift the copier safely. 4. Please be careful not to get your hand caught under the copier as you place the copier onto the table or roll feeder. NOTE: Keep the shipping retainers after installing the machine. They will be reused if the machine is moved to another location in the future. 1. For either the table or the roll feeder, lower the feet [A] (table: 2 feet, roll feeder: 4 feet) so that it does not move while the copier is being installed. 2. Place the copier [B] on the table [C] or roll feeder [D] (Place the copier feet [E] into the table holes [F]). !WARNING The copier is not attached to the table. Pushing the copier too hard may cause it to fall. While moving the copier, always push the table. B047/B048 3-6 SM