Ricoh FW780 Service Manual - Page 365

INSTALLATION PROCEDURE [C] Installation [E] [D] [E] [B] [A] B436I102.WMF !CAUTION 1. Unplug the main machine's power cord before starting the following procedure. 2. Before starting the installation, make sure the machine is level. 3. The copier is very heavy (85 kg, 187 lbs). To avoid serious injury, make sure that you have a sufficient number of people to assist you. It takes at least two people to lift the copier safely. 4. Please be careful not to get your hand caught under the copier as you place the copier onto the roll feeder. 1. Lower the feet [A] (4 feet) so that the roll feeder [B] does not move while the copier [C] is being installed. !CAUTION Do not open the paper tray until the copier is placed on top of the roll feeder. The paper tray drawer is very heavy. Without the copier weight to hold it down, the roll feeder will fall over. The tray is shipped with a safety latch holding the drawer shut. 2. Place the copier on the roll feeder. Fit the copier feet [D] into the roll feeder holes [E]. !WARNING The copier is not attached to the roll feeder. Pushing the copier too hard may cause it to fall. While moving the copier, always push the roll feeder. SM 3-21 B047/B048