Ricoh FW780 Service Manual - Page 379

SERVICE TOOLS Mode No. Roll Feeder Cutting Length Adjustment (300 mm, Plain Paper) Function Adjusts the cutting length of 300 mm in the plain paper mode. When this value is changed, the values for SP43 and SP44 are automatically changed according to the following table: Inch versions Meter versions SP42 X SP42 X SP43 X SP43 X - 0.4 SP44 X + 0.5 SP44 X + 0.5 Data 0: Standard -9.9 ← 0 → 9.9 mm Longer Shorter 42 If the settings in SP43 or SP44 exceed the maximum and/or minimum values, the maximum or minimum values are used instead. Note: The value for the 1st roll feed can only be input when the corresponding indicator is blinking (same for 2nd roll feed). Use the Function Select Key to switch between the two indicators. Roll Feeder Cutting To adjust the cutting length of 300 mm Length Adjustment in the translucent paper mode. (300 mm, Translucent Paper) Note: 43 The value for the 1st roll feed can only be input when the corresponding indicator is blinking (same for 2nd roll feed). Use the Function Select Key to switch between the two indicators. Roll Feeder Cutting To adjust the cutting length of 300 mm Length Adjustment in the translucent film mode. (300 mm, translucent Film) 44 Note: The value for the 1st roll feed can only be input when the corresponding indicator is blinking (same for 2nd roll feed). Use the Function Select Key to switch between the two indicators. Service Tables SM 4-5 B047/B048