Ricoh PJ WXL4540 Users Manual

Ricoh PJ WXL4540 Manual

Ricoh PJ WXL4540 manual content summary:

  • Ricoh PJ WXL4540 | Users Manual - Page 1
    RICOH PJ LX3000ST/LW3000ST Series RICOH PJ XL4540/WXL4540
  • Ricoh PJ WXL4540 | Users Manual - Page 2
  • Ricoh PJ WXL4540 | Users Manual - Page 3
    34 How to operate 34 OSD Menu Tree 35 Picture 38 Screen 40 Setting 42 Volume 44 Options 45 Options | LASER Settings 47 3D 48 Troubleshooting 49 Maintaining the filter 54  VGA Analog 55 Appendices 55  HDMI Digital 57 Configurations of Terminals 59 Terminal : Analog RGB (Mini D-sub 15
  • Ricoh PJ WXL4540 | Users Manual - Page 4
    all warnings, precautions and maintenance as recommended in this user's guide to maximize the life of your unit. ■ Warning- This cabinet cover, or you may be exposed to dangerous voltage. Refer servicing to qualified service personnel only. The supplied power cord is for use with this machine
  • Ricoh PJ WXL4540 | Users Manual - Page 5
    wire grounding type to prevent blade exposure. Failure to follow these instructions may result in fire or electric shock. Plastic bags can be it to fall down, resulting in an injury. b) Contact your sales or service representative to clean or replace parts for a machine that is installed on a wall
  • Ricoh PJ WXL4540 | Users Manual - Page 6
    Usage Notice ■ Caution- ■ Caution■ Caution■ Caution■ Caution- f) For sales or service representatives: - Use brackets that are strong enough to support the projector. PJ WXL4540 Series and LW3000ST Series projectors weigh about 5.5 kg (12.2 lb.). - The projector must be installed in a location
  • Ricoh PJ WXL4540 | Users Manual - Page 7
    Unplug this product from the wall outlet and take the product to qualified service personnel if you encounter any of the following conditions: a) The normally when following the operating instructions. Adjust only those controls that are covered by the operating instructions. e) The product has
  • Ricoh PJ WXL4540 | Users Manual - Page 8
    Otherwise it may overheat, which could result in a risk of fire. Do: ■ A fter unpacking this product, read the manual carefully, and fol- low all the operating and other instructions. ■ T urn off the product before cleaning. ■ U se a soft cloth moistened with mild detergent to clean the display
  • Ricoh PJ WXL4540 | Users Manual - Page 9
    PEAU 5 3 2 If you wish to discard this product, please contact your local authorities, the shop where you bought this product, your local dealer or sales/service representatives. 7 English English
  • Ricoh PJ WXL4540 | Users Manual - Page 10
    your local authorities, the shop where you bought this product, your local dealer or sales/ service representatives. Warning • Never throw batteries into a fire. Using the batteries improperly may cause them drop the remote control. • Dispose of used battery according to the instructions. 8 English
  • Ricoh PJ WXL4540 | Users Manual - Page 11
    the United States of America FCC notice MODEL NAME: RICOH PJ XL4540 TRADE NAME: PROJECTOR MODEL NAME: RICOH XL4540 Tested To Comply With FCC Standards FOR HOME OR and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
  • Ricoh PJ WXL4540 | Users Manual - Page 12
    Usage Notice RESPONSIBLE PARTY: Ricoh Americas Corporation 5 Dedrick Place, West Caldwell, NJ 07006 Phone: 973-882-2000 Notice: Shielded cables All connections to other computing devices must be made using
  • Ricoh PJ WXL4540 | Users Manual - Page 13
    2006/95/EC Notice: Users in EU countries CE Marking Traceability Information (For EU Countries Only) Manufacturer: Ricoh Co., Ltd. 3-6 Nakamagome 1-chome, Ohta-ku, Tokyo. 143-8555, Japan Importer: Ricoh Europe PLC 20 Triton Street, London. NW1 3BF, United Kingdom User Information on Electrical and
  • Ricoh PJ WXL4540 | Users Manual - Page 14
    If you wish to discard this product, please contact your local authorities, the shop where you bought this product, your local dealer or sales/service representatives. Laser Notice • This Product is classified as Class 2 of IEC60825-1:2007 and also complies with 21 CFR 1040.10 and 1040.11 except
  • Ricoh PJ WXL4540 | Users Manual - Page 15
    Usage Notice Notice: Users in the EU Note for the Battery and/or Accumulator Symbol In accordance with the Battery Directive 2006/66/EC Article 20 Information for end-users Annex II, the above symbol is printed on batteries and accumulators. This symbol means that in the European Union, used
  • Ricoh PJ WXL4540 | Users Manual - Page 16
    the indi- vidual. • Do not use 3D glasses for viewing any material other than 3D images. • Before viewing 3D images, make sure to read the manuals provided with your 3D glasses and 3D compatible content. • Avoid viewing 3D images for a long period of time. Take a break of 15 minutes or longer
  • Ricoh PJ WXL4540 | Users Manual - Page 17
    Introduction Product Features Outstanding features include: ■ Single chip DLP® technology ■ NTSC3.58/NTSC4.43/PAL(B/D/G/H/I/M/N)/SECAM (B/D/G/K/K1/L) and SDTV(480i/576i), EDTV(480p/576p), HDTV(720p/1080i/1080p) compatible ■ Multi-Auto functions: Auto detection, Auto image and Auto saving the
  • Ricoh PJ WXL4540 | Users Manual - Page 18
    below are in the box. If something is missing, please contact your nearest customer service center. Projector  Due to different applications in each country, some regions may have with the projector. Documentation :  Read This First  User Manual (CD) Power Cord VGA Cable 16 English
  • Ricoh PJ WXL4540 | Users Manual - Page 19
    Introduction Product Overview Main Unit 5 1 2 4 9  The interface is subject to model's specifications. 8 3 6 7 1. Control Panel 2. Focusing Ring 3. Ventilation (inlet) 4. IR Receiver 5. Ventilation (outlet) 6. Speaker 7. Power Socket 8. Input / Output Connections 9. Lens 17 English English
  • Ricoh PJ WXL4540 | Users Manual - Page 20
    Introduction Control Panel 1 2 3 4 5 8 6 9 7 1. Power LED 2. Enter 3. Temp LED 4. Light LED 5. Menu 6. Input 7. Four Directional Select Keys 8. Power/Standby button 9. IR Receiver 18 English
  • Ricoh PJ WXL4540 | Users Manual - Page 21
    The interface is subject to model's specifications.  Monitor loop through only support in Computer-In/ YPbPr. 1. Computer-In/YPbPr Connector (PC Analog Input/HDTV/YPbPr) 2. HDMI2 Input Connector 3. HDMI1 Input Connector 4. Service 5. Power Socket 6. Monitor-Out Connector 7. PC Control (9-pin DIN
  • Ricoh PJ WXL4540 | Users Manual - Page 22
    Introduction Remote Control 1 2 15 3 13 14 4 12 5 11 6 13 10 7 9 8 1. Transmitter 2. Picture 3. Input 4. AV Mute 5. Four Directional Select Keys 6. Auto Set 7. Volume +/8. Magnify +/- 9. Eco 10. Freeze 11. Menu 12. Enter 13. Keystone / 14. Aspect 15. Power 20 English
  • Ricoh PJ WXL4540 | Users Manual - Page 23
    Introduction 1 Press firmly and slide the battery cover off. Remote Control Battery Installation 2 Remove the old battery and install new one (CR2025). Ensure that the side with a "+" is facing up. 3 Put the cover back TS TS CR2302V5OL M CR2302V5OL To ensure safe operation, please observe
  • Ricoh PJ WXL4540 | Users Manual - Page 24
    Introduction Remote Control Operating Range ■ When pointing the remote control directly toward the projector (Remote control signal receiver), operating range for the remote control is within 7 m (23.0 ft). Also, operation range available for four directions (up, down, left, right to the projector)
  • Ricoh PJ WXL4540 | Users Manual - Page 25
    Basic Operations Connecting the Projector Connect to Computer/Notebook MOLEX 1 5 6 R E62405SP  Due to the difference in applications for 7 8 each country, External Display some regions may have different accessories.  (*) Optional accessory 9 Microphone Audio Output 1 RS232 Cable
  • Ricoh PJ WXL4540 | Users Manual - Page 26
    Basic Operations Connect to Video Sources DVD Player, Set-top Box, HDTV receiver 1 23 5 R E62405SP Composite Video Output  Due to the 8 difference in applications for each country, 67 some regions may have different 4 accessories.  (*) Optional accessory Microphone Audio Output 1
  • Ricoh PJ WXL4540 | Users Manual - Page 27
    Basic Operations Powering the Projector On / Off Powering On the Projector 1. Securely connect the power cord and signal cable. When connected, the POWER/STANDBY LED will turn Orange.  When the power mode is in standby mode (power consumption < 0.5W), the VGA output/ input and audio will be
  • Ricoh PJ WXL4540 | Users Manual - Page 28
    and the projector. Warning Indicator When the warning indicators (see below) come on,  Contact the the projector will automatically shutdown: nearest service  "Light" LED indicator is lit red and if "POWER/STANDBY" center if the indicator flashes amber. projector displays these symptoms
  • Ricoh PJ WXL4540 | Users Manual - Page 29
    Basic Operations Adjusting the Projected Image Adjusting the Projector�s Height The projector is equipped with elevator feet for adjusting the image height. 1. Locate the adjustable foot you wish to modify on the underside of the projector. 2. Rotate the adjustable ring clockwise to raise the
  • Ricoh PJ WXL4540 | Users Manual - Page 30
    Basic Operations Adjusting zoom-in of the projector To focus on the image, slide the focus ring to the left or to the right until the image is clear. Focusing Ring 28 English
  • Ricoh PJ WXL4540 | Users Manual - Page 31
    Basic Operations Adjusting Projection Image Size (Diagonal)  XGA/WXGA series: focus range 1.3123 ~ 10.1706 ft. (0.4 ~ 3.1m) 113 mm Distance (A) (from front cap of the projector to screen) Wide Range of Projection Distance (C) Screen Screen (H) 43.1 mm 113.4 mm Wide Range of Projection
  • Ricoh PJ WXL4540 | Users Manual - Page 32
    Basic Operations XGA Diagonal Length of Image Screen Size W x H Width inch mm inch mm Height inch mm C (Projection Distance) Front cover to screen (mm) inch mm D (Offset) inch mm Bottom cover to bottom of screen (mm) 56.4 1432.3 45.1 1146.5 33.9 859.8 27.9 710.8 597.4 6 60
  • Ricoh PJ WXL4540 | Users Manual - Page 33
    User Settings Control Panel & Remote Control Control Panel Using the Control Panel POWER Refer to the "Power On/Off the Projector" section on pages 25-26. Enter Press "Enter" to confirm your item selection. INPUT Press "INPUT" to select an input signal. MENU Press "MENU" to launch the on-
  • Ricoh PJ WXL4540 | Users Manual - Page 34
    User Settings Remote Control 32 English Using the Remote Control Transmitter Send signals to the projector. Picture Input AV Mute Select the preset picture mode. Select the input source. Momentarily turn off/on the audio and video. Four Directional Select Keys Auto Set Use to select items
  • Ricoh PJ WXL4540 | Users Manual - Page 35
    User Settings Freeze Menu Enter Keystone / Aspect Power Pause the screen image. Press again to resume the screen image. Press "Menu" to launch the on screen display (OSD), or go back to the previous menu. Select or confirm settings Adjust the image to compensate for distortion caused by tilting
  • Ricoh PJ WXL4540 | Users Manual - Page 36
    User Settings On-screen Display Menus The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. How to operate 1. To open the OSD menu, press "Menu" on the Remote Control or Projector Keypad. 2 When OSD is displayed, use the
  • Ricoh PJ WXL4540 | Users Manual - Page 37
    User Settings OSD Menu Tree Main Menu Tree 1st level 2nd level Color Mode Picture Screen Wall color Brightness Contrast Sharpness Saturation Hue Gamma Color Temp Aspect Ratio Phase Clock H.Position V.Position Digtial Zoom V Keystone Ceiling Mount 3rd level Bright PC Movie Game User White/
  • Ricoh PJ WXL4540 | Users Manual - Page 38
    User Settings Main Menu Tree 1st level Setting Volume 2nd level Language Menu Location Closed Caption VGA OUT (Standby) VGA 2 (Function) Test Pattern Reset Speaker Line Out Microphone Mute Volume Microphone Volume 3rd level English German French Italian Spanish Polish Swedish Dutch Portugese
  • Ricoh PJ WXL4540 | Users Manual - Page 39
    User Settings Main Menu Tree 1st level Options 3D 2nd level 3rd level Logo Logo Capture Auto Source Input Auto Power Off (Min) LASER Settings Default/User On/Off VGA-1, VGA-2, HDMI-1, HDMI-2, Composite LASER Hours Used (Normal) LASER Hours Used (ECO) LASER Power Mode High Altitude On/Off
  • Ricoh PJ WXL4540 | Users Manual - Page 40
    User Settings Picture 38 English Color Mode There are many factory presets optimized for various types of images. Use the ◄ or ► button to select the item. Bright: For brightness optimization. PC: For meeting presentation. Movie: For playing video content. Game: For game content. User:
  • Ricoh PJ WXL4540 | Users Manual - Page 41
    User Settings  "Sharpness", "Saturation" and "Hue" functions are only supported under video mode. Sharpness Adjust the sharpness of the image. Press the ◄ button to decrease the sharpness. Press the ► button to increase the sharpness. Saturation
  • Ricoh PJ WXL4540 | Users Manual - Page 42
    User Settings Screen  "H. Position" and "V. Position" ranges will depend on input source. Aspect Ratio Auto: Keep the image with original width-height ratio and maxi- mize the image to fit native horizontal or vertical pixels. 4:3: The image will be scaled to fit the screen and displayed using
  • Ricoh PJ WXL4540 | Users Manual - Page 43
    User Settings Digital Zoom Press the ◄ button to reduce the size of an image. Press the ► button to magnify an image on the projection screen. V Keystone Press the ◄ or ► button to adjust image distortion vertically. If the image looks trapezoidal, this option can help make the image rectangular.
  • Ricoh PJ WXL4540 | Users Manual - Page 44
    User Settings Setting Language Choose the multilingual OSD menu. Press the ◄ or ► button into the sub menu and then use the ▲ or ▼ button to select your preferred language. Press ► on the remote control to finalize the selection. 42 English Menu Location Choose the menu location on the display
  • Ricoh PJ WXL4540 | Users Manual - Page 45
    User Settings VGA-2 (Function) Input: Choose "Input" to let the VGA port works as a VGA input function. Output: Choose "Output" to enable the VGA Out function once the projector is powered on. Test Pattern Display a test pattern. Reset Choose "Yes" to return the parameters on all menus to the
  • Ricoh PJ WXL4540 | Users Manual - Page 46
    User Settings Volume 44 English Speaker Choose "On" to enable the speaker. Choose "Off" to disable the speaker. Line Out Choose "On" to enable the line out function. Choose "Off" to disable the line out function. Microphone Choose "On" to enable the microphone. Choose "Off" to disable the
  • Ricoh PJ WXL4540 | Users Manual - Page 47
    User Settings Options  For successful logo capture, please ensure that the on-screen image does not exceed the projector's native resolution. (WXGA:1280x800).  "Logo Capture" is not available when 3D is enabled.  Before active this function, it is recommended that "Aspect Ratio" is set to the "
  • Ricoh PJ WXL4540 | Users Manual - Page 48
    User Settings Auto Power Off (Min) Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the projector. The projector will automatically power off when the countdown has finished (in minutes). LASER Settings Refer to page 47. High Altitude On: The
  • Ricoh PJ WXL4540 | Users Manual - Page 49
    User Settings Options | LASER Settings LASER Hours Used (Normal) Display the projection time of normal mode. LASER Hours Used (ECO) Display the projection time of ECO mode. LASER Power Mode Normal: Normal mode. ECO: Use this function to dim the projector light source which will lower power
  • Ricoh PJ WXL4540 | Users Manual - Page 50
    the HQFS 3D input signals from Composite/SVideo connector connector.  "Frame Packing" / "Side-bySide(Half)" / "Top and Bottom" are supported from HDMI 1.4a 3D input signals. 3D Auto: When a HDMI 1.4a 3D timing identification signal is de- tected, the 3D image is selected automatically. Choose
  • Ricoh PJ WXL4540 | Users Manual - Page 51
    Troubleshooting Troubleshooting  If you experience trouble with the projector, refer to the following information. If the problem persists, please contact your local dealer or service center. Problem: No image appears on screen  Ensure all the cables and power connections are correctly and
  • Ricoh PJ WXL4540 | Users Manual - Page 52
    Troubleshooting Problem: The screen of the Notebook or PowerBook computer is not displaying lens.  Make sure the projection screen is between the required distance. Please see pages 29~30. Problem: The image is stretched when displaying 16:9 DVD Change "Aspect" by pressing the key on remote control
  • Ricoh PJ WXL4540 | Users Manual - Page 53
    Troubleshooting Problem: Image is reversed  Select "Screen --> Ceiling Mount" from the OSD and adjust the projection direction. 51 English English
  • Ricoh PJ WXL4540 | Users Manual - Page 54
    Troubleshooting Problem: Indicator lighting message Message POWER indicator (Red/Blue) TEMP indicator (Red) Standby (Input power cord) (Red) Normal (Power on) Powering up (Warming up) Power off (
  • Ricoh PJ WXL4540 | Users Manual - Page 55
    Troubleshooting Problem: Message Reminders  O ver temperature - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used. Please: 1.
  • Ricoh PJ WXL4540 | Users Manual - Page 56
    Maintaining the filter Installing and Cleaning the Optional Dust Filter We recommend you clean the dust filter every 500 hours of operation, or more often if you are using the projector in a dusty environment. When the warning message appears on the screen, do the following to clean the air filter:
  • Ricoh PJ WXL4540 | Users Manual - Page 57
    Appendices List of Compatible Signals  VGA Analog a. PC signal Modes Resolution V. Frequency [Hz] H. Frequency [Hz] 640x480 60 31.5 640x480 67 35.0 640x480 72 37.9 VGA 640x480 75 37.5 640x480 85 43.3 640x480 120 61.9 IBM 720x400 70 31.5 800x600 56 35.1 800x600 60 37
  • Ricoh PJ WXL4540 | Users Manual - Page 58
    Appendices b. Extended wide timing Modes Resolution V. Frequency [Hz] H. Frequency [Hz] 1280x720 60 44.8 1280x800 60 49.6 WXGA 1366x768 60 47.7 1440x900 60 59.9 WSXGA+ 1680x1050 60 65.3 c. Component signal Modes Resolution V. Frequency [Hz] H. Frequency [Hz] 480i 720x480 (
  • Ricoh PJ WXL4540 | Users Manual - Page 59
    Appendices  HDMI Digital a. PC signal Modes Resolution V. Frequency [Hz] H. Frequency [Hz] 640x480 60 31.5 640x480 67 35.0 640x480 72 37.9 VGA 640x480 75 37.5 640x480 85 43.3 640x480 120 61.9 IBM 720x400 70 31.5 800x600 56 35.1 800x600 60 37.9 800x600 72 48.1
  • Ricoh PJ WXL4540 | Users Manual - Page 60
    Appendices b. Extended wide timing Modes Resolution V. Frequency [Hz] H. Frequency [Hz] 1280x720 60 44.8 1280x800 60 49.6 WXGA 1366x768 60 47.7 1440x900 60 59.9 WSXGA+ 1680x1050 60 65.3 c. Video signal Modes Resolution V. Frequency [Hz] H. Frequency [Hz] 480p 640x480 59.94/60
  • Ricoh PJ WXL4540 | Users Manual - Page 61
    Appendices Configurations of Terminals Terminal : Analog RGB (Mini D-sub 15 pin) 54321 10 9 8 7 6 15 14 13 12 11 1 Red (R/Cr) Input/R Output 9 DDC 5V / NC 2 Green (G/Y) Input/G Output 10 Ground (Ver. sync.) 3 Blue (B/Cb) Input/B Output 11 ICP download 4 ICP download / NC 12 DDC Data
  • Ricoh PJ WXL4540 | Users Manual - Page 62
    Appendices PC Control  RS232 Port Setting Items Communication Method Bits per seconds Data bits Parity Stop bits Flow control Method Asynchronous Communication 9600 8 bits None 1 None  RS232 shell is grounded.  RS232 Signals Connection Computer COM Port (D-Sub 9pin connector) Projector COM
  • Ricoh PJ WXL4540 | Users Manual - Page 63
    DLP 0.65" chip (WXGA) Resolution RICOH PJ XL4540/LX3000ST Series 1024 x 768pixels (XGA) RICOH PJ WXL4540/LW3000ST Series 1280 x 800pixels (WXGA) Lens Computer compatibility Video compatibility Horizontal scan rate IBM PC Compatible, support HDTV (1080i/p, 720p, 576i/p, 480i/p) include both PC
  • Ricoh PJ WXL4540 | Users Manual - Page 64
    Appendices Note • This model complies with the above specifications. • Designs and specifications are subject to change without notice. • This model may not be compatible with features and/or specifications that may be added in the future. 62 English
  • Ricoh PJ WXL4540 | Users Manual - Page 65
    Appendices Ceiling Mount Installation If you want to use a third-party ceiling mount kit, please ensure the screw used to attach the mount to the projector meet the following specifications:  Screw type: M4*4  Minimum screw length: 10mm  Damages resulting from incorrect installation are not
  • Ricoh PJ WXL4540 | Users Manual - Page 66
    HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. • Other product and company names mentioned in this user's manual may be the trademarks or registered trademarks of their respective holders. 64 English
  • Ricoh PJ WXL4540 | Users Manual - Page 67
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67