Rocketfish RF-BTR212 Quick Setup Guide (English)

LED indicator:

•

Lights blue when paired and connected to your Bluetooth device.

•

Blinks blue when not connected to your Bluetooth device.

•

Turns off when the AC/DC adapter is not connected or plugged in.

Optical digital

audio cable

6 ft 3.5 mm stereo

audio cable

3.5 mm jack to RCA stereo

audio plug adapter

OR

Audio receiver or other audio

device with analog or digital input

Wirelessly stream music from your iPhone, iPad, or other Bluetooth-enabled device to your

home stereo or other audio device.

Package contents

• Bluetooth Music Receiver

•

6 ft 3.5 mm stereo audio cable

• AC/DC adapter

•

3.5 mm jack to RCA stereo audio plug adapter

•

Quick Setup Guide

Features

•

aptX® audio decoding: The highest Bluetooth stereo audio quality possible

•

Optical digital audio output: The highest quality audio connection to your home stereo

•

Analog stereo audio output: easily connect to amplified speakers or any device with an audio

input jack

•

Wireless range up to 33 feet (10 m)

• Wall mount feature

•

Remembers up to eight Bluetooth devices

Note

: Music can be played from only one device at a time.

Front view

Back view

Top view

Bottom view

Setting up your Bluetooth Music Receiver

You can choose either analog (good) or digital (best) cables to connect your Bluetooth

Music Receiver, depending on the connections available on your home stereo system.

Digital connection

1

Plug one end of an optical digital audio cable into the

OPTICAL

jack on your Bluetooth Music

Receiver.

2

Plug the other end of the optical digital audio cable into the Optical Digital Audio In jack on

your home stereo system.

OR

Analog connection

1

Plug one end of the 6 ft 3.5 mm stereo audio cable (included) into the

Audio Out

jack on your

Bluetooth Music Receiver.

2

Plug the other end of the 6 ft 3.5 mm stereo audio cable into the Audio In jack on your home

stereo system or other audio component. If your home stereo system does not have a 3.5 mm

Audio In connector, you must use a 3.5 mm jack to RCA stereo audio plug adapter (included).

QUICK SETUP GUIDE

Bluetooth Music Receiver

RF-BTR212

Connecting power:

1

Plug the AC/DC adapter into the

DC 5V

jack on your Bluetooth Music Receiver.

2

Plug the AC/DC adapter into a wall power outlet. The LED indicator begins to blink blue to

indicate that the unit is on and ready to be paired to your Bluetooth devices.

Pairing your devices using Bluetooth

Before you can use your Bluetooth Music Receiver with a Bluetooth device, you need to pair

your device to the Bluetooth Music Receiver.

To pair your devices using Bluetooth:

1

Make sure that a compatible Bluetooth device (like a music player or phone) is turned on

and within 33 feet (10 meters) of your Bluetooth Music Receiver.

2

Turn on your Bluetooth Music Receiver by plugging in the AC/DC adapter. The LED indicator

blinks on and off slowly. Your Bluetooth Music Receiver is in pairing mode.

3

Go to the Bluetooth manager by doing the following:

a

For iPad/iPhone/iPod touch:

i. From your iPad/iPhone/iPod touch home page, click

Settings

.

ii. From

Settings

, click

General

.

iii. From

General

, click

Bluetooth

.

b

For Android Phone/Tablet:

i. From your smart phone/tablet home page, click

Settings

.

ii. From the

Settings

menu, click

Wireless and networks

.

iii. Click to activate Bluetooth.

iv. Click

Bluetooth settings

.

4

On the Bluetooth device, select

Music Receiver

in the list of found devices.

5

On the Bluetooth device, enter 0000 as the PIN, if prompted. The LED indicator lights blue on

the Bluetooth Music Receiver.

6

If you are pairing with a computer, make sure that your Bluetooth Music Receiver is selected

as the computer’s default playback device. See the computer’s documentation for

instructions.

LED

indicator

Rocketfish RF-BTR212 Quick Setup Guide (English)

Rocketfish RF-BTR212 Manual

Rocketfish RF-BTR212 manual content summary: